Sony Owners Record, For customers in the U.S.A. SNC-RZ30N only, Declaration of Conformity

Page 2

Owner's Record

The model and serial numbers are located at the bottom. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. ____________________

Serial No. ____________________

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

For AC Adaptor

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Important

Nameplate is located on the bottom.

For customers in the U.S.A. (SNC-RZ30N only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wll not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

The shielded interface cable recommended in this manual must be used with this equipment in order to

comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

If you have any questions about this product, you may call:

Sony's Business Information Center (BIC) at 1-800-686-7669

or Write to: Sony Customer Information Services Center

6900-29, Daniels Parkway, PMB 330 Fort Myers, Florida 33912

Declaration of Conformity

Trade Name:

SONY

Model No:

SNC-RZ30N

Responsible Party: Sony Electronics Inc.

Address:

680 Kinderkamack Road, Oradell,

 

NJ 07649 USA

Telephone No:

201-930-6972

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Voor de klanten in Nederland

Dit apparaat bevat een vast ingebouwde batterij die niet vervangen hoeft te worden tijdens de levensduur van het apparaat.

Raadpleeg uw leverancier indien de batterij toch vervangen moet worden. De batterij mag alleen vervangen worden door vakbekwaam servicepersoneel.

Gooi de batterij miet weg maar lever deze in als klein chemisch afval (KCA).

Lever het apparaat aan het einde van de levensduur in voor recycling, de batterij zal dan op correcte wijze verwerket worden.

2

Image 2
Contents Network Camera Declaration of Conformity Owners RecordFor customers in the U.S.A. SNC-RZ30N only Voor de klanten in NederlandPage Table of Contents Others Operating Precautions How to Use This User’s GuidePrecautions Welcome Logging in as AdministratorLogging in to Homepage Logging in as a UserJava applet viewer Other functions on the welcome page for AdministratorAbout Viewers ActiveX viewerTip Configuration of Main ViewerMenu Section Main viewerFrame rate Image Control SectionTrigger control parts View sizePanning and Tilting Controlling the Monitor ImageOperating the Camera Zooming FocusingPanning and tilting using the tablet About the zoom rangeSending a Still Image File to an FTP Server Moving the Camera to the Preset PositionControlling the Application Manually Sending a Still Image via E-mailTo save the captured image Controlling Alarm OutputCapturing a Monitor Image Application menu Configuration Administrator MenuBasic menu System setting Section Configuring the SystemSystem setting Date time setting Section System PC current date time RebootFactory default Manual current date timeUpper Half of Camera setting Setting the CameraCamera setting Zoom mode Lower Half of Camera settingWhite balance mode Focus modeExposure compensation Camera resetDay/Night mode SaturationConfiguring the Network Network Ethernet settingAdministrator, User 1 to Setting the UserUser setting Secondary DNSUser access right Setting the SecuritySecurity setting Default policySetting the Camera Position and Action Preset position settingProgramming the Tour Tour setting Section Selected tour name Tilt speedSequence Available periodSending Images to FTP Server FTP client settingSetting the FTP Client Function FTP client setting Alarm mode setting Section Periodical sending mode setting SectionOperating the Digest Viewer Built-in memory FTP server settingDownloading Images from the Camera Slot adrv/B-slot bdrvSetting the Smtp Function Smtp setting Sending an Image via E- mailAlarm mode setting Section Setting the Alarm Out 1 Function Alarm out 1 setting Setting the Alarm Out 1 orAlarm out 1 or 2 setting Recording Images in Memory Image memory settingTimer mode setting Section Memory OverwritePeriodical recording mode setting Section Directory Structure of Image Memory Setting the Alarm BufferAlarm buffer setting Serial setting Communicating Data via Serial PortSchedule setting Setting the ScheduleSetting the Activity Detection Function Activity detection settingShowing the Pop-up Pop-up settingAlarm pop-up text Manual pop-up textUsing the Supplied Setup Program Assigning the IP Address Using the Setup ProgramChanging the Communication Bandwidth Setting the Date and TimeManual setting Using the computer’s date and time Assigning the IP Address to the Camera Using ARP CommandsRebooting the Camera