Sony SNC-RZ30N manual Setting the User, User setting, Secondary DNS, Bandwidth control

Secondary DNS

Type the IP address of the secondary DNS server, if necessary.

Bandwidth control

Limits the bandwidth of the data communication of the camera.

You can select from among the following:

Unlimited, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0 (Mbps)

Select Unlimited when you do not want to limit the bandwidth.

Notes

•If you limit the bandwidth, the camera performance may be affected, for example, the frame rate of image display may be reduced.

•The actual bandwidth may differ from the selected option depending on the network environments.

OK/Cancel

See “Buttons common to every setting page” on page 16.

Setting the User

— User setting Page

When you click User on the Administrator menu, the User setting page appears.

Use this page to set the user names and passwords of Administrator and up to 9 kinds of users (User 1 to User 9), and the access right of each user.

Administrator, User 1 to 9

Specify User name, Password, Re-type password and Access right for each user ID.

User name

Type a user name between 4 and 16 characters.

Password

Type a password between 4 and 16 characters.

Re-type password

To confirm the password, type the same characters as you typed in the Password box.

Note

If you type an incorrect character in the User name, Password or Re-type password box, a message like the following appears. In this case, click OK to cancel the message and re-type the correct character.

Access right

Select the access right for each user from the drop-down list. You can select from Level 1 to Level 4. The rights afforded to each access right are as follows:

Administrating the Camera

Setting the User — User setting Page

23