Sony SNC-RZ30N manual Lower Half of Camera setting, White balance mode, Zoom mode, Focus mode

Page 20

4 Click on the still image to specify the trimming portion.

A red frame that appears when you clicked indicates the trimming portion.

The trimming portion is determined as shown below:

Point rotated by 180° around the

 

axis of the center of the still image

Still image

White balance mode

Select the white balance mode.

You can select from among Auto, Indoor, Outdoor, One push WB, ATW and Manual.

If you select One push WB, the ONE PUSH TRIGGER button is displayed. Click the button to adjust the white balance instantly.

If you select Manual, the R Gain and B Gain controls are displayed. Set 0 to 255 for each control.

Administrating the Camera

Red trimming

Center of the Clicked point

frame

still image

To change the trimming portion, click on another point on the image.

5 Click OK at the bottom of the window.

The trimmed image is displayed on the main viewer page.

6 To close the image, click on the upper-right corner.

Zoom mode

Select the zoom mode.

Select Full to operate the optical zoom of × 25 and the electronic zoom of × 12, giving × 300 in total. The electronic zoom will operate after the optical zoom. Select Optical only to operate the optical zoom of × 25 only. In this case, you can use an electronic zoom of × 2 by clicking the DZOOM x 2 button on the main viewer page. To cancel the electronic zoom, click the DZOOM x 1 button. (See “Zooming” on page 12.)

Focus mode

Select the focus mode.

Select Auto to adjust the focus automatically.

Select Manual to adjust the focus manually using the NEAR and FAR buttons on the main viewer page. If you click the ONE PUSH AF button, the focus is adjusted instantly. (See “Focusing” on page 12.)

Lower Half of Camera setting Page

Exposure mode

Select the exposure from among Full auto, Shutter priority, Iris priority and Manual.

The setting items required for each setting appear.

Full auto: Adjusts the exposure automatically using the electronic shutter, iris and gain. Select the Back light compensation menu On or Off.

Shutter priority: Adjusts the exposure automatically using the iris and gain. Select the electronic shutter speed from the Shutter drop-down list.

Iris priority: Adjusts the exposure automatically using the electronic shutter and gain. For the iris adjustment, select the F number from the Iris drop- down list.

Manual: Select the electronic shutter, iris and gain from the drop-down list for each control.

Back light compensation

Select On to activate the backlight compensation, or Off to deactivate it.

20

Setting the Camera — Camera setting Page

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Network Camera Owners Record For customers in the U.S.A. SNC-RZ30N onlyDeclaration of Conformity Voor de klanten in NederlandPage Table of Contents Others Operating Precautions How to Use This User’s GuidePrecautions Logging in as Administrator Logging in to HomepageWelcome Logging in as a UserOther functions on the welcome page for Administrator About ViewersJava applet viewer ActiveX viewerConfiguration of Main Viewer Menu SectionTip Main viewerImage Control Section Trigger control partsFrame rate View sizePanning and Tilting Controlling the Monitor ImageOperating the Camera Focusing Panning and tilting using the tabletZooming About the zoom rangeMoving the Camera to the Preset Position Controlling the Application ManuallySending a Still Image File to an FTP Server Sending a Still Image via E-mailTo save the captured image Controlling Alarm OutputCapturing a Monitor Image Application menu Configuration Administrator MenuBasic menu System setting Section Configuring the SystemSystem setting Date time setting Section Reboot Factory defaultSystem PC current date time Manual current date timeUpper Half of Camera setting Setting the CameraCamera setting Lower Half of Camera setting White balance modeZoom mode Focus modeCamera reset Day/Night modeExposure compensation SaturationConfiguring the Network Network Ethernet settingSetting the User User settingAdministrator, User 1 to Secondary DNSSetting the Security Security settingUser access right Default policySetting the Camera Position and Action Preset position settingProgramming the Tour Tour setting Section Tilt speed SequenceSelected tour name Available periodSending Images to FTP Server FTP client settingSetting the FTP Client Function FTP client setting Alarm mode setting Section Periodical sending mode setting SectionOperating the Digest Viewer FTP server setting Downloading Images from the CameraBuilt-in memory Slot adrv/B-slot bdrvSetting the Smtp Function Smtp setting Sending an Image via E- mailAlarm mode setting Section Setting the Alarm Out 1 Function Alarm out 1 setting Setting the Alarm Out 1 orAlarm out 1 or 2 setting Recording Images in Memory Image memory settingTimer mode setting Section Memory OverwritePeriodical recording mode setting Section Directory Structure of Image Memory Setting the Alarm BufferAlarm buffer setting Serial setting Communicating Data via Serial PortSetting the Schedule Setting the Activity Detection FunctionSchedule setting Activity detection settingPop-up setting Alarm pop-up textShowing the Pop-up Manual pop-up textUsing the Supplied Setup Program Assigning the IP Address Using the Setup ProgramChanging the Communication Bandwidth Setting the Date and TimeManual setting Using the computer’s date and time Assigning the IP Address to the Camera Using ARP CommandsRebooting the Camera
Top Page Image Contents