Sony SNC-RZ30N Using the Supplied Setup Program, Assigning the IP Address Using the Setup Program

Page 42

Double-click Setup.exe.

Others

The program detects the SNC-RZ30 cameras connected to the local network and lists them on the Network tab window.

Others

Using the Supplied Setup Program

To connect the camera to a network, you need to assign a new IP address to the camera when you installed the camera for the first time.

You can assign an IP address in two ways:

•Using the setup program stored in the supplied CD- ROM (see page 42)

•Using the ARP (Address Resolution Protocol) commands (see page 44)

This section explains how to assign an IP address to the camera using the supplied setup program and configure the network.

The setup program also allows the communication bandwidth setting and date and time setting.

Before starting, connect the camera to a computer or a local network, referring to “Assigning the IP Address to the Camera” in the supplied Installation Manual.

Assigning the IP Address Using the Setup Program

1 Insert the supplied CD-ROM disc into your CD- ROM drive.

2 Double-click the Setup folder in the CD-ROM drive.

3

4 Install the IP Setup Program to your computer following the wizard displayed.

If the Software License Agreement is displayed, read it carefully and accept the agreement to continue the installation.

5 Start the IP Setup Program.

6 Click on the camera you want to assign a new IP address in the list.

The network settings for the selected camera are displayed.

7 Set the IP address.

To obtain the IP address automatically from a DHCP server:

Select Obtain an IP address automatically. The IP address, Subnet mask and Default gateway are assigned automatically.

To specify the IP address manually:

Select Use the following IP address, and type the IP address, Subnet mask and Default gateway in each box.

8 Set the primary DNS server address and, if necessary, secondary DNS server address.

To obtain the DNS server addresses automatically:

Select Obtain DNS server address automatically.

42

Using the Supplied Setup Program

Image 42

Contents Network Camera Declaration of Conformity Owners RecordFor customers in the U.S.A. SNC-RZ30N only Voor de klanten in NederlandPage Table of Contents Others How to Use This User’s Guide PrecautionsOperating Precautions Welcome Logging in as AdministratorLogging in to Homepage Logging in as a UserJava applet viewer Other functions on the welcome page for AdministratorAbout Viewers ActiveX viewerTip Configuration of Main ViewerMenu Section Main viewerFrame rate Image Control SectionTrigger control parts View sizeControlling the Monitor Image Operating the CameraPanning and Tilting Zooming FocusingPanning and tilting using the tablet About the zoom rangeSending a Still Image File to an FTP Server Moving the Camera to the Preset PositionControlling the Application Manually Sending a Still Image via E-mailControlling Alarm Output Capturing a Monitor ImageTo save the captured image Configuration Administrator Menu Basic menuApplication menu Configuring the System System settingSystem setting Section Date time setting Section System PC current date time RebootFactory default Manual current date timeSetting the Camera Camera settingUpper Half of Camera setting Zoom mode Lower Half of Camera settingWhite balance mode Focus modeExposure compensation Camera resetDay/Night mode SaturationConfiguring the Network Network Ethernet settingAdministrator, User 1 to Setting the UserUser setting Secondary DNSUser access right Setting the SecuritySecurity setting Default policySetting the Camera Position and Action Preset position settingProgramming the Tour Tour setting Section Selected tour name Tilt speedSequence Available periodFTP client setting Setting the FTP Client Function FTP client settingSending Images to FTP Server Alarm mode setting Section Periodical sending mode setting SectionOperating the Digest Viewer Built-in memory FTP server settingDownloading Images from the Camera Slot adrv/B-slot bdrvSetting the Smtp Function Smtp setting Sending an Image via E- mailAlarm mode setting Section Setting the Alarm Out 1 or Alarm out 1 or 2 settingSetting the Alarm Out 1 Function Alarm out 1 setting Image memory setting Timer mode setting SectionRecording Images in Memory Memory OverwritePeriodical recording mode setting Section Setting the Alarm Buffer Alarm buffer settingDirectory Structure of Image Memory Serial setting Communicating Data via Serial PortSchedule setting Setting the ScheduleSetting the Activity Detection Function Activity detection settingShowing the Pop-up Pop-up settingAlarm pop-up text Manual pop-up textUsing the Supplied Setup Program Assigning the IP Address Using the Setup ProgramSetting the Date and Time Manual settingChanging the Communication Bandwidth Assigning the IP Address to the Camera Using ARP Commands Rebooting the CameraUsing the computer’s date and time