Tilt speed
Select the tilt speed from the
Sequence
Select the preset number 1 to 16 for each of 16 list boxes. The camera moves to the preset positions stored in the selected preset numbers in sequence. The sequence of camera movement starts from the preset position specified in the
Apply/Cancel
See “Buttons common to every setting page” on page 16.
Checking the Tour Settings
— Tour table Section
Activating the Tour
— Tour selection Section
You can activate the tour according to the schedule.
Selected tour name
Select the tour name A to E you want to activate. Select None if you do not want to activate any tour or if you want to stop the tour in action.
Available period
Select the period for which you can activate the tour. Always: The tour can be activated any time.
Use scheduler: The tour is activated according to the schedule selected on the Schedule No. menu below.
Schedule No.
When Use scheduler is selected on the Available period menu, select the schedule you want to activate the tour (program).
Click to select the check box(es) 1 to 6. You can select multiple schedules.
To check the contents of schedules, click Schedule check. (See “Setting the Schedule — Schedule setting Page” on page 40.)
Notes
•If you operate the camera using the image control section on the main viewer page, the tour in action stops.
•The camera settings (see page 19) you made during zooming are not valid.
Administrating the Camera
Sequence
Shows the preset numbers in the programmed order for each tour A to E.
Speed
Shows the stay time, pan speed and tilt speed settings for each tour.
Setting the Camera Position and Action — Preset position setting Page
27