Sony SNC-RZ30N System PC current date time, Manual current date time, Time zone selecting, Reboot

Page 18

Administrating the Camera

Note

When you purchased the camera, be sure to check the date and time of the camera and set them if necessary.

System (PC) current date time

Displays the date and time set on your computer. Click Apply to transfer the computer’s date and time to the camera.

The set date and time are shown on Current date time.

Manual current date time

When you want to set the camera’s date and time manually.

Select the lower 2-digits of the year, month, date, hour, minutes and seconds from each drop-down list. Click Apply to change the Current date time setting to the date and time you selected.

Time zone selecting

Set the time difference from Greenwich Mean Time in the area where the camera is installed. When you send an E-mail, the senting date and time is adjusted according to this setting.

Select the time zone where the camera is installed from the drop-down list. Click Apply to change the Current date time setting according to the selection.

Notes

•If the time zone selected on the Time zone selecting menu is different from that set on the computer, the time is adjusted using the time zone difference and set on the camera.

•Due to the network properties, there may be a slight difference between the actual time and the time set on the camera.

Date time format

Select the format of date and time to be displayed on the monitor image from the drop-down list.

You can select from among yyyy-mm-dd hh:mm:ss (year-month-day hour:minute:second), mm-dd-yyyy hh:mm:ss (month-day-year hour:minute:second), and dd-mm-yyyy hh:mm:ss (day-month-year hour:minute:second).

Click Apply to transfer the setting to the camera.

Reboot

Reboots the camera.

Click Reboot, and “The SNC-RZ30 will be rebooted. Are you sure?” appears. Click OK to reboot the camera.

Factory default

Resets the camera to the factory settings.

Click Factory default, and “All configuration information will be initialized as factory setting. Are you sure?” appears. Click OK to reset to the factory settings.

18

Configuring the System — System setting Page

Image 18

Contents Network Camera Declaration of Conformity Owners RecordFor customers in the U.S.A. SNC-RZ30N only Voor de klanten in NederlandPage Table of Contents Others How to Use This User’s Guide PrecautionsOperating Precautions Welcome Logging in as AdministratorLogging in to Homepage Logging in as a UserJava applet viewer Other functions on the welcome page for AdministratorAbout Viewers ActiveX viewerTip Configuration of Main ViewerMenu Section Main viewerFrame rate Image Control SectionTrigger control parts View sizeControlling the Monitor Image Operating the CameraPanning and Tilting Zooming FocusingPanning and tilting using the tablet About the zoom rangeSending a Still Image File to an FTP Server Moving the Camera to the Preset PositionControlling the Application Manually Sending a Still Image via E-mailControlling Alarm Output Capturing a Monitor ImageTo save the captured image Configuration Administrator Menu Basic menu Application menu Configuring the System System settingSystem setting Section Date time setting Section System PC current date time RebootFactory default Manual current date timeSetting the Camera Camera settingUpper Half of Camera setting Zoom mode Lower Half of Camera settingWhite balance mode Focus modeExposure compensation Camera resetDay/Night mode SaturationConfiguring the Network Network Ethernet settingAdministrator, User 1 to Setting the UserUser setting Secondary DNSUser access right Setting the SecuritySecurity setting Default policySetting the Camera Position and Action Preset position settingProgramming the Tour Tour setting Section Selected tour name Tilt speedSequence Available periodFTP client setting Setting the FTP Client Function FTP client settingSending Images to FTP Server Alarm mode setting Section Periodical sending mode setting SectionOperating the Digest Viewer Built-in memory FTP server settingDownloading Images from the Camera Slot adrv/B-slot bdrvSetting the Smtp Function Smtp setting Sending an Image via E- mailAlarm mode setting Section Setting the Alarm Out 1 or Alarm out 1 or 2 settingSetting the Alarm Out 1 Function Alarm out 1 setting Image memory setting Timer mode setting SectionRecording Images in Memory Memory OverwritePeriodical recording mode setting Section Setting the Alarm Buffer Alarm buffer settingDirectory Structure of Image Memory Serial setting Communicating Data via Serial PortSchedule setting Setting the ScheduleSetting the Activity Detection Function Activity detection settingShowing the Pop-up Pop-up settingAlarm pop-up text Manual pop-up textUsing the Supplied Setup Program Assigning the IP Address Using the Setup ProgramSetting the Date and Time Manual settingChanging the Communication Bandwidth Assigning the IP Address to the Camera Using ARP Commands Rebooting the CameraUsing the computer’s date and time