Sony SNC-RZ30N manual Sending an Image via E- mail, Setting the Smtp Function Smtp setting

Page 32
— SMTP setting Page

Administrating the Camera

Sending an Image via E- mail

When you click SMTP on the Administrator menu, the SMTP setting page appears.

Use this page to set up for the SMTP function that can capture and send a still image attached to an E-mail. You can capture a still image at the moment when a trigger occurs by an external sensor input, the built-in activity detection function or a manual trigger button. The captured still image is sent as an atttachment of the E- mail. You can also send a still image periodically.

Activating/Deactivating the SMTP Function — SMTP usage setting Page

To activate the SMTP function, select Use SMTP function and click OK. The SMTP setting page appears.

When you do not use the SMTP function, select Do not use SMTP function and click OK.

Note

The frame rate and operability on the main viewer page may decrease while an image file is being transmitted via an E-mail.

Setting the SMTP Function

— SMTP setting Page

SMTP server name

Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.

Recipient e-mail address

Type the recipient E-mail address up to 64 characters. You can specify up to three recipient e-mail addresses.

Administrator e-mail address

Type the Administrator e-mail address up to 64 characters.

This address is used for reply mail and sending error messages from the camera.

Subject

Type the subject/title of the E-mail up to 64 characters.

Message

Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.)

Image file name

Type the basic file name you want to assign to the image to attach an E-mail. You can use up to 6 alphanumeric, - (hyphen) and _ (underscore) for naming.

Suffix

Select the suffix to add to the file name.

None: No suffix is added. The basic file name is assigned to the image to be sent via an E-mail.

Date/Time: The date/time suffix is added to the file name.

The date/time suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits) and second (2 digits) , thus 12-digit number is added to the file name.

Sequence number: A consecutive number is added to the basic file name. A number of up to 10 digits between 0000000000 and 4294967295 is added to the file name.

Sequence No. clear

Click Apply to reset the Sequence number suffix to 0.

Mode

Select the mode of the SMTP function.

Manual: Sends a still image attached to an E-mail manually. After selecting Manual, click OK. The SMTP function mode is set to Manual.

In this mode, when you click the (Trigger) button on the main viewer page, a still image is

32

Sending an Image via E-mail — SMTP setting Page

Image 32
Contents Network Camera Owners Record For customers in the U.S.A. SNC-RZ30N onlyDeclaration of Conformity Voor de klanten in NederlandPage Table of Contents Others Operating Precautions How to Use This User’s GuidePrecautions Logging in as Administrator Logging in to HomepageWelcome Logging in as a UserOther functions on the welcome page for Administrator About ViewersJava applet viewer ActiveX viewerConfiguration of Main Viewer Menu SectionTip Main viewerImage Control Section Trigger control partsFrame rate View sizePanning and Tilting Controlling the Monitor ImageOperating the Camera Focusing Panning and tilting using the tabletZooming About the zoom rangeMoving the Camera to the Preset Position Controlling the Application ManuallySending a Still Image File to an FTP Server Sending a Still Image via E-mailTo save the captured image Controlling Alarm OutputCapturing a Monitor Image Application menu Configuration Administrator MenuBasic menu System setting Section Configuring the SystemSystem setting Date time setting Section Reboot Factory defaultSystem PC current date time Manual current date timeUpper Half of Camera setting Setting the CameraCamera setting Lower Half of Camera setting White balance modeZoom mode Focus modeCamera reset Day/Night modeExposure compensation SaturationConfiguring the Network Network Ethernet settingSetting the User User settingAdministrator, User 1 to Secondary DNSSetting the Security Security settingUser access right Default policySetting the Camera Position and Action Preset position settingProgramming the Tour Tour setting Section Tilt speed SequenceSelected tour name Available periodSending Images to FTP Server FTP client settingSetting the FTP Client Function FTP client setting Alarm mode setting Section Periodical sending mode setting SectionOperating the Digest Viewer FTP server setting Downloading Images from the CameraBuilt-in memory Slot adrv/B-slot bdrvSetting the Smtp Function Smtp setting Sending an Image via E- mailAlarm mode setting Section Setting the Alarm Out 1 Function Alarm out 1 setting Setting the Alarm Out 1 orAlarm out 1 or 2 setting Recording Images in Memory Image memory settingTimer mode setting Section Memory OverwritePeriodical recording mode setting Section Directory Structure of Image Memory Setting the Alarm BufferAlarm buffer setting Serial setting Communicating Data via Serial PortSetting the Schedule Setting the Activity Detection FunctionSchedule setting Activity detection settingPop-up setting Alarm pop-up textShowing the Pop-up Manual pop-up textUsing the Supplied Setup Program Assigning the IP Address Using the Setup ProgramChanging the Communication Bandwidth Setting the Date and TimeManual setting Using the computer’s date and time Assigning the IP Address to the Camera Using ARP CommandsRebooting the Camera