Sony SNC-RZ30N manual Setting the Camera Position and Action, Preset position setting

Page 25

Network address/Subnet 1 to Network address/Subnet 10

Type the IP addresses and subnet mask values you want to allow or deny access to the camera.

You can specify up to 10 IP addresses and subnet mask values. For a subnet mask, type 8 to 32.

To temporarily cancel the Default Policy for a specified IP address/subnet mask, select Allow or Deny from the drop-down list on the right.

Tip

The subnet mask value represents the bit number from the left of the network address.

For example, the subnet mask value for 255.255.255.0 is 24.

If you set “192.168.0.0/24, Allow,” you can allow access from the computers having an IP address between 192.169.0.0 and 192.168.0.255.

OK/Cancel

See “Buttons common to every setting page” on page 16.

Setting the Camera Position and Action

— Preset position setting Page

When you click Preset position on the Administrator menu, the Preset position setting page appears.

Use this page to store the pan, tilt and zoom positions of the camera (Preset position) in memory and program the sequenced action of the camera (Tour).

Storing the Pan, Tilt and Zoom Positions

— Position preset Section

You can store up to 16 setting of the pan, tilt and zoom positions (Preset positions) of the camera in memory.

Note

For a Preset position setting, you can store the pan, tilt and zoom positions only. Set the Focus mode, Exposure mode and White balance mode menu to Auto. (See “Setting the Camera — Camera setting Page” on page 19.)

Preset No.

Select a preset number 1 to 16 from the drop-down list. Click Preset call to move the camera to the pan, tilt and zoom positions stored in the selected preset number.

Preset position name

Type a preset position name for the selected preset number up to 32 characters.

Apply

Use this button to store the camera position in a preset number.

To store, proceed as follow:

1 Display the monitor image on the main viewer page, and pan, tilt and zoom the camera to the position you want to store as a Preset position.

2 Select the Preset No. from the drop-down list and enter the Preset position name.

3 Click Apply.

The camera position is stored in memory.

Administrating the Camera

Setting the Camera Position and Action — Preset position setting Page

25

Image 25

Contents Network Camera For customers in the U.S.A. SNC-RZ30N only Owners RecordDeclaration of Conformity Voor de klanten in NederlandPage Table of Contents Others Precautions How to Use This User’s GuideOperating Precautions Logging in to Homepage Logging in as AdministratorWelcome Logging in as a UserAbout Viewers Other functions on the welcome page for AdministratorJava applet viewer ActiveX viewerMenu Section Configuration of Main ViewerTip Main viewerTrigger control parts Image Control SectionFrame rate View sizeOperating the Camera Controlling the Monitor ImagePanning and Tilting Panning and tilting using the tablet FocusingZooming About the zoom rangeControlling the Application Manually Moving the Camera to the Preset PositionSending a Still Image File to an FTP Server Sending a Still Image via E-mailCapturing a Monitor Image Controlling Alarm OutputTo save the captured image Basic menu Configuration Administrator MenuApplication menu System setting Configuring the SystemSystem setting Section Date time setting Section Factory default RebootSystem PC current date time Manual current date timeCamera setting Setting the CameraUpper Half of Camera setting White balance mode Lower Half of Camera settingZoom mode Focus modeDay/Night mode Camera resetExposure compensation SaturationNetwork Ethernet setting Configuring the NetworkUser setting Setting the UserAdministrator, User 1 to Secondary DNSSecurity setting Setting the SecurityUser access right Default policyPreset position setting Setting the Camera Position and ActionProgramming the Tour Tour setting Section Sequence Tilt speedSelected tour name Available periodSetting the FTP Client Function FTP client setting FTP client settingSending Images to FTP Server Periodical sending mode setting Section Alarm mode setting SectionOperating the Digest Viewer Downloading Images from the Camera FTP server settingBuilt-in memory Slot adrv/B-slot bdrvSending an Image via E- mail Setting the Smtp Function Smtp settingAlarm mode setting Section Alarm out 1 or 2 setting Setting the Alarm Out 1 orSetting the Alarm Out 1 Function Alarm out 1 setting Timer mode setting Section Image memory settingRecording Images in Memory Overwrite MemoryPeriodical recording mode setting Section Alarm buffer setting Setting the Alarm BufferDirectory Structure of Image Memory Communicating Data via Serial Port Serial settingSetting the Activity Detection Function Setting the ScheduleSchedule setting Activity detection settingAlarm pop-up text Pop-up settingShowing the Pop-up Manual pop-up textAssigning the IP Address Using the Setup Program Using the Supplied Setup ProgramManual setting Setting the Date and TimeChanging the Communication Bandwidth Rebooting the Camera Assigning the IP Address to the Camera Using ARP CommandsUsing the computer’s date and time