Sony MPK-TRV2 Removing the video camera recorder, Remove the accessories Open the marine pack

Page 15

Removing the video camera recorder

Before opening the marine pack, rinse it with fresh water and dry with a soft cloth.

Note

Dry the marine pack well.

Wipe off any water between the front and rear shells with a towel.

Make sure you are dry. Take care that no water drips from your wet suit.

When you open the marine pack, follow this procedure to prevent the video camera recorder from getting wet.

1 Remove the accessories.

2 Open the marine pack.

1

Before opening the marine pack, rinse it with

 

fresh water and dry with a soft cloth.

2

Unfasten both buckles and remove the front

 

shell.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Takeshell. the video camera recorder out of the front

1 Disconnect the remote

4 Disconnect the

control cable.

microphone

5 Remove the

cable.

 

viewfinder

 

adaptor.

 

2 Unfasten the

3 Detach the video

screw.

camera recorder.

 

4 Insert the remote control plug and the microphone plug where they were.

Microphone

plug

Remote control plug

5 Remove the adaptor.

adaptor A

adaptor B

15

Sony MPK-TRV2 (EN,F) 3-859-264-1X

Image 15
Contents Marine Pack Table of contents Features Supplied accessories Precautions Rear shell Front shell Labeling the parts and controlsPosition of the adaptor and the remote control cable Adaptor aAdaptor B CCD Do not twist the O-ring Check that there are no scratches or cracksRemove any dust, sand or hair from the O-ring Grease the O-ringAdjust the video camera recorder When using adaptor A, attach it to the video camera recorderWhen using adaptor B When using adaptor aAccessory belt Raise the buckles until they stopFasten the video camera recorder with Attach the front shell to the rear shell Now you are ready for underwater recordingTo stop recording RecordingTo zoom To keep a subject in focusWhen the Leak lamp flashes To attach/detach the lid of the video cable connectorTo detach To attach Remove the adaptor Remove the accessories Open the marine packRemoving the video camera recorder Takeshell. the video camera recorder out of the frontUnderwater recording Specifications ML20, HVL-80DACheckpoints CCD-TR910 Tables des matières Caractéristiques218 CCD-TR710193 Accessoires fournis420 PrécautionsPartie avant Nomenclature215 Partie arrière226 Adaptateur aAdaptateur B Remarques 237248 Remarques sur le joint toriqueEffectuer les réglages sur le camescope Fixation du camescope dans le Marine Pack259 Voir page suivanteFixer le camescope dans le Marine Pack 2610Quand l’adaptateur a est utilisé Quand l’adaptateur B est utiliséAccessoires 2711Relever complètement les boucles Fixer la partie avant sur la partie arrière 2812Verrouillage de la mise au point Enregistrement2913 Variation de focaleRetraitInsertion Si le témoin Leak clignote3014 Insertion et retrait du cache-connecteur de câble vidéoSortir le camescope de la partie avant Enlever les accessoires Ouvrir le Marine PackRetrait du camescope 31153216 Enregistrement sous-marinSpécifications 1733Poste Points à vérifier Sony MPK-TRV2 EN,F Sony MPK-TRV2 EN,F Sony MPK-TRV2 EN,F

MPK-TRV2 specifications

The Sony MPK-TRV2 is an underwater housing designed for select Sony camcorders, allowing videographers to capture stunning footage beneath the waves. This innovative accessory provides a seamless solution for enthusiasts looking to explore underwater photography and videography without compromising the performance of their equipment.

One of the main features of the MPK-TRV2 is its robust construction. Made from high-quality materials, the housing is designed to withstand the pressures of underwater environments. With a depth rating of up to 40 meters (approximately 130 feet), users can confidently dive deep and capture vibrant underwater scenes without the fear of damaging their camcorders.

The housing incorporates a clear polycarbonate shell, enabling clear visibility of the camcorder's LCD screen, allowing for easy framing of shots and monitoring of recordings. Additionally, the housing features an ergonomic design with easy-to-access controls that mimic the camcorder's buttons, ensuring that users can operate their device effortlessly even while wearing gloves.

Another significant characteristic of the MPK-TRV2 is its integrated lens port that allows for the use of wide-angle conversion lenses. This feature expands the shooting capabilities, giving videographers the ability to capture expansive underwater landscapes or close-up shots with enhanced detail. The housing is also equipped with a built-in filter that helps in color correction, particularly important for underwater shooting where colors can be muted or altered by the water.

For those worried about accessibility and compatibility, the MPK-TRV2 is designed specifically for certain models of Sony camcorders, ensuring a snug fit and reliable performance. The installation of the camcorder into the housing is user-friendly, enabling quick setup so that users can transition from above-water shooting to underwater adventures smoothly.

In terms of technology, the MPK-TRV2 supports the latest in Sony’s imaging advancements, allowing users to record in high-definition quality, ensuring that the underwater scenes are captured with crisp clarity and vibrant colors. This compatibility with advanced recording formats makes it a vital tool for professional and amateur videographers alike.

In summary, the Sony MPK-TRV2 emerges as an essential accessory for underwater videography. Its durable construction, user-friendly design, compatibility with wide-angle lenses, and ability to capture stunning high-definition footage highlight its role in enhancing the underwater filming experience. For anyone looking to delve into the aquatic world of photography and videography, the MPK-TRV2 is an investment that promises to unlock creative possibilities beneath the surface.