Sony MPK-TRV2 Check that there are no scratches or cracks, Grease the O-ring, Storage

Page 8

Notes on the O-ring

The O-ring assures the waterproof function of the marine pack. To maintain waterproof integrity, use it correctly. Incorrect handling may cause water to leak in.

O-ring

Front shell

Rear shell

Check that there are no scratches or cracks.

Scratches or cracks on the O-ring may cause water to leak in. If the O-ring is damaged in this way, replace it with a new one. Do not remove the O-ring from the groove with a metal tool or a tool with a sharp point.

Scratches

Crack

Remove any dust, sand or hair from the O-ring.

Make sure there is no dust, sand or hair on the O-ring, in the groove, or on the surface of the marine pack where

the O-ring touches. If there is, clean them completely, or the O-ring and the surface of the marine pack may be damaged and water may leak in.

Grease the O-ring

The grease protects the O-ring from wear.

Check that there are no cracks or dust on the O-ring, then grease it using your finger. While greasing, double check that there are no cracks or dust.

Never use cloth or paper to apply grease because the fibers may cling.

Do not use any type of grease other then the supplied one, or it may damage the O-ring.

If you run out of silicone grease (2-115-921-01) you can purchase it from your nearest Sony Service Center.

Do not twist the O-ring.

Put the O-ring in the groove evenly. Never twist it.

Not this way

Do not pinch the O-ring with the marine pack.

When joining the front and rear shells, take care not to pinch the O-ring between them. If this happens, not only will the O-ring be damaged, but water may leak in.

Storage

Put the supplied spare O-rings in the original carton and store it in a cool place.

∙Do not expose the O-ring to direct sunlight.

∙Do not place a heavy object on the O-ring.

∙Do not fold the O-ring.

Dust

Hair

8

Surface of the marine pack where the O-ring touches

O-ring groove

Sand

O-ring

Useful life of the O-ring.

Depending upon maintenance and the length of use, we recommend changing the O-ring every one or two years. The O-ring (3-952-928-01) can be replaced at your nearest Sony Service Center.

Sony MPK-TRV2 (EN,F) 3-859-264-1X

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Marine Pack Table of contents Features Supplied accessories Precautions Labeling the parts and controls Rear shell Front shellAdaptor B Position of the adaptor and the remote control cableAdaptor a CCD Check that there are no scratches or cracks Remove any dust, sand or hair from the O-ringGrease the O-ring Do not twist the O-ringWhen using adaptor A, attach it to the video camera recorder Adjust the video camera recorderWhen using adaptor a When using adaptor BFasten the video camera recorder with Accessory beltRaise the buckles until they stop Now you are ready for underwater recording Attach the front shell to the rear shellRecording To zoomTo keep a subject in focus To stop recordingTo detach To attach When the Leak lamp flashesTo attach/detach the lid of the video cable connector Remove the accessories Open the marine pack Removing the video camera recorderTakeshell. the video camera recorder out of the front Remove the adaptorUnderwater recording Checkpoints SpecificationsML20, HVL-80DA Tables des matières Caractéristiques 218CCD-TR710 CCD-TR910Accessoires fournis 193Précautions 420Nomenclature 215Partie arrière Partie avantAdaptateur B 226Adaptateur a 237 RemarquesRemarques sur le joint torique 248Fixation du camescope dans le Marine Pack 259Voir page suivante Effectuer les réglages sur le camescope2610 Quand l’adaptateur a est utiliséQuand l’adaptateur B est utilisé Fixer le camescope dans le Marine PackRelever complètement les boucles Accessoires2711 2812 Fixer la partie avant sur la partie arrièreEnregistrement 2913Variation de focale Verrouillage de la mise au pointSi le témoin Leak clignote 3014Insertion et retrait du cache-connecteur de câble vidéo RetraitInsertionEnlever les accessoires Ouvrir le Marine Pack Retrait du camescope3115 Sortir le camescope de la partie avantEnregistrement sous-marin 3216Poste Points à vérifier Spécifications1733 Sony MPK-TRV2 EN,F Sony MPK-TRV2 EN,F Sony MPK-TRV2 EN,F

MPK-TRV2 specifications

The Sony MPK-TRV2 is an underwater housing designed for select Sony camcorders, allowing videographers to capture stunning footage beneath the waves. This innovative accessory provides a seamless solution for enthusiasts looking to explore underwater photography and videography without compromising the performance of their equipment.

One of the main features of the MPK-TRV2 is its robust construction. Made from high-quality materials, the housing is designed to withstand the pressures of underwater environments. With a depth rating of up to 40 meters (approximately 130 feet), users can confidently dive deep and capture vibrant underwater scenes without the fear of damaging their camcorders.

The housing incorporates a clear polycarbonate shell, enabling clear visibility of the camcorder's LCD screen, allowing for easy framing of shots and monitoring of recordings. Additionally, the housing features an ergonomic design with easy-to-access controls that mimic the camcorder's buttons, ensuring that users can operate their device effortlessly even while wearing gloves.

Another significant characteristic of the MPK-TRV2 is its integrated lens port that allows for the use of wide-angle conversion lenses. This feature expands the shooting capabilities, giving videographers the ability to capture expansive underwater landscapes or close-up shots with enhanced detail. The housing is also equipped with a built-in filter that helps in color correction, particularly important for underwater shooting where colors can be muted or altered by the water.

For those worried about accessibility and compatibility, the MPK-TRV2 is designed specifically for certain models of Sony camcorders, ensuring a snug fit and reliable performance. The installation of the camcorder into the housing is user-friendly, enabling quick setup so that users can transition from above-water shooting to underwater adventures smoothly.

In terms of technology, the MPK-TRV2 supports the latest in Sony’s imaging advancements, allowing users to record in high-definition quality, ensuring that the underwater scenes are captured with crisp clarity and vibrant colors. This compatibility with advanced recording formats makes it a vital tool for professional and amateur videographers alike.

In summary, the Sony MPK-TRV2 emerges as an essential accessory for underwater videography. Its durable construction, user-friendly design, compatibility with wide-angle lenses, and ability to capture stunning high-definition footage highlight its role in enhancing the underwater filming experience. For anyone looking to delve into the aquatic world of photography and videography, the MPK-TRV2 is an investment that promises to unlock creative possibilities beneath the surface.
Top Page Image Contents