Ricoh IS450 operating instructions Introduction, Features

Page 15

1. Introduction

Features

This section describes the features of this scanner.

Ultra-fast scanning

When scanning A4K (8½” × 11” K), monochrome at 200dpi, this scanner can scan 55 (57) images/minute. When scanning A4K (8½” × 11” K), monochrome at 400dpi, this scanner can scan 31 (32) images/minute. During double-sided scanning, when scanning A4K (8½” × 11” K), monochrome at 200dpi, this scanner can scan 86 (88) images/minute.

*When using the Auto Document Feeder (ADF) in binary scanning, these speeds apply to the second and subsequent sheets.

Simultaneous scanning of both sides of a document (Duplex Model only)

If a document consists of individual, separate sheets, both sides of each sheet can be scanned simultaneously. This capability eliminates the bother of having to flip document sheets over.

Direct operation using the buttons on the scanner (Manual Scanning function)

If using a driver that supports the Manual Scanning function, scanning can be initiated by pressing the {Start} button on the scanner. This function is useful when scanning a document that needs to be set in place for each scan.

Large 150-sheet paper capacity

Up to 150 sheets* can be placed in the scanner’s Auto Document Feeder (ADF). * A4 (64g/m2) or 8½” × 11” (20lb)

Printing on scanned documents (optional)

The Endorser Unit Type A is provided as an optional mechanism that prints a symbol or the number of documents that have been scanned by the Auto Document Feeder (ADF). This capability is useful for referencing scanned data or confirming that a document has been scanned.

1

Image 15
Contents Image Scanner Introduction Copyright Declaration of Conformity Safety Information Safety During OperationExamples of Indications Safety Information Iii Important Information Important InformationImportant Information Reference How to Read This ManualHow to Read This Manual LimitationTable of Contents Setting Originals OriginalsGeneral Scanning Method Manual Scanning Options MaintenanceSpecifications DIP Switches FunctionsPage Introduction FeaturesIntroduction Space-saving designGuide to the Scanner DIP Switches Power ConnectorRotary Switch Scsi ConnectorDescription Understanding the IndicatorsIntroduction Preparing for Installation Setup locationChecking the Scanner Location Installation environment Important Setting up the Scanner Installation spaceUsable range Recommended range Scsi Connection Require Ments for the Scanner Connecting to the Host ComputerWhat is SCSI? Setting up the ScannerSetting the Scsi ID Connecting the Scsi Cable No Connection to Other PortConnecting to the Host Computer Connecting the Scsi Cable Connection to Other Port Connecting the Power Cable Plug the other end of the power cable into the power outlet Turning On/Off the Scanner Power Turning On the Scanner PowerTurning Off the Scanner Power Initializing the Scanner Originals Recommended Sizes and Weights of OriginalsDifficult to Detect Sizes Original Sizes and Scanning Area Originals Original sizes that can be detected automaticallyContact glass Auto Document Feeder ADF Setting the Original on the Contact Glass Setting OriginalsAlign the originals on the ADF Setting the Original in the Auto Document Feeder ADFSimplex scanning Duplex scanning Guides Make sure the Auto Document Feeder ADF is closed Setting Originals General Scanning Method Scanning OriginalsScanning Originals Manual ScanningItem to check Action When Scanning Does not StartError Indicators and Solutions TroubleshootingDescription of error Action When an Original is Jammed in the Auto Document Feeder ADF Procedures to Correct Errors in the ADFReplacing the Ink Ribbon Do not pull on the Endorser’s cord Cleaning the Endorser Cleaning the Scanner MaintenanceAppendices Cleaning the Feed Roller and DrumMaintenance Cleaning the White Roller Duplex Model Only Maintenance Moving the Scanner Carrying the Scanner a Short Distance Disposing of the ScannerOptions Image Processing Unit Type aRed Lamp Unit Type a Endorser Unit Type a Printing Function Scanner Electrical and Hardware Specifications SpecificationsDIP Switches Preview FunctionsHalftone scanning ScanScanning Composition Binary scanningStandard mode Dynamic threshold modeBinary Scanning/Threshold Halftone Scanning Gray Scale Scanning Area Extraction Section Area Multi-area Settings Auto Photo/Letter Resolution Contrast BrightnessGamma Correction Smoothing Binary FiltersParameter Download Noise removalDocument Size Detection Document Size Detection on the Contact GlassDocument Size Detection in the Auto Document Feeder ADF When Erase Background is disabled When Erase Background is enabledErase Background Index DIP Switch 10, 27Red Lamp Unit Appendices