Ricoh IS450 operating instructions Introduction

Page 2

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the in- structions in this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes:

Some illustrations might be slightly different from your machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Important

Parts of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.

Using a cable that is not an ANSI-compliant shielded SCSI-2 cable could result in misoperation and / or generate radio waves that exceed the limits of the EMC Directive .

When the machine is moved from a cold location to a warm location,condensation will form on the inside of themashine. Wait 1 hour or more before turning on the machine to allow the condensation to evaporate.

Power Supply

1.Power requirements: 220-240 V, 50/60 Hz, 5A or more.

2.Insert the power plug securely into the wall socket.

3.Make sure that the wall outlet is near the machine and readily accessible.

4.Do not connect other equipment to the same socket.

5.Do not step on or set anything on the power cord.

6.Do not connect other equipment to the same extension cord.

7.Be sure that the power cord is not in a position where it would trip someone.

8.The wall outlet must be easily accessible.

9.Do not damage, break or make any modifications to the power cord. Do not place heavy ob- jects on it, pull it hard or bend it more than necessary. These actions could cause and electric shock or fire.

10.Do not plug or unplug the power cord with wet hands or an electric shock might occur.

11.When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock.

12.When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing fire or electric shock.

Image 2

Contents Image Scanner Introduction Copyright Declaration of Conformity Examples of Indications Safety InformationSafety During Operation Safety Information Iii Important Information Important InformationImportant Information Limitation How to Read This ManualHow to Read This Manual ReferenceTable of Contents General Scanning Method Manual Scanning Setting OriginalsOriginals DIP Switches Functions MaintenanceSpecifications OptionsPage Features IntroductionSpace-saving design IntroductionGuide to the Scanner Scsi Connector Power ConnectorRotary Switch DIP SwitchesUnderstanding the Indicators DescriptionIntroduction Checking the Scanner Location Preparing for InstallationSetup location Setting up the Scanner Installation space Installation environment ImportantUsable range Recommended range Setting up the Scanner Connecting to the Host ComputerWhat is SCSI? Scsi Connection Require Ments for the ScannerConnecting to the Host Computer Setting the Scsi IDConnecting the Scsi Cable No Connection to Other Port Connecting the Scsi Cable Connection to Other Port Connecting the Power Cable Plug the other end of the power cable into the power outlet Turning Off the Scanner Power Turning On/Off the Scanner PowerTurning On the Scanner Power Initializing the Scanner Recommended Sizes and Weights of Originals OriginalsDifficult to Detect Sizes Contact glass Auto Document Feeder ADF Original Sizes and Scanning AreaOriginals Original sizes that can be detected automatically Setting Originals Setting the Original on the Contact GlassSetting the Original in the Auto Document Feeder ADF Align the originals on the ADFSimplex scanning Duplex scanning Guides Make sure the Auto Document Feeder ADF is closed Setting Originals Scanning Originals General Scanning MethodManual Scanning Scanning OriginalsWhen Scanning Does not Start Item to check ActionDescription of error Action Error Indicators and SolutionsTroubleshooting Procedures to Correct Errors in the ADF When an Original is Jammed in the Auto Document Feeder ADFReplacing the Ink Ribbon Do not pull on the Endorser’s cord Cleaning the Endorser Maintenance Cleaning the ScannerCleaning the Feed Roller and Drum AppendicesMaintenance Cleaning the White Roller Duplex Model Only Maintenance Moving the Scanner Disposing of the Scanner Carrying the Scanner a Short DistanceRed Lamp Unit Type a OptionsImage Processing Unit Type a Endorser Unit Type a Printing Function Specifications Scanner Electrical and Hardware SpecificationsDIP Switches Functions PreviewBinary scanning ScanScanning Composition Halftone scanningBinary Scanning/Threshold Standard modeDynamic threshold mode Halftone Scanning Gray Scale Scanning Area Extraction Section Area Multi-area Settings Auto Photo/Letter Resolution Brightness ContrastGamma Correction Noise removal Binary FiltersParameter Download SmoothingDocument Size Detection in the Auto Document Feeder ADF Document Size DetectionDocument Size Detection on the Contact Glass Erase Background When Erase Background is disabledWhen Erase Background is enabled DIP Switch 10, 27 IndexRed Lamp Unit Appendices