Toshiba IK-WB70A manual Physical description, Front panel, Connectors, General I/O Terminal Block

Page 12

Introduction

Installation

How to Use

Physical description

Front panel

Illuminance sensor

Lens

IR LED

Connectors

General I/O terminal block

Ethernet 10/100 RJ45 plug

Audio output (green) mini-jack

Microphone input (pink) mini-jack

Power cord socket (black)

GND

Cable length: approx. 39 inches (1000 mm)

General I/O Terminal Block

This Network Camera provides a general I/O terminal block which is used to connect external input or output devices. The pin deﬁnitions are described below.

Deﬁnitions

Conﬁguration

N.C.

485B

485A AC24V AC24V

GND DI DO +12V

N.C.: No Connector

485B: RS485-

485A: RS485+

AC24V: 24 VAC Power Input

AC24V: 24 VAC Power Input

GND:	Ground
DI :	Digital Input
DO :	Digital Output
+12V :	12 VDC Output

Appendix

Pin	Name	Speciﬁcation
N.C.	No Connector
485B	RS485-	3.3 V
485A	RS485+	3.3 V
AC24V	24 VAC Power Input	24 VAC ± 10 %
AC24V	24 VAC Power Input	24 VAC ± 10 %
GND	Ground
DI	Digital Iutput	OPEN/Short-to-GND, isolation 2 kV
DO	Digital Output	Max. 12 VDC, max. 400 mA, isolation 2 kV
+12V	12 VDC Output	12 VDC ± 10 %, max. 0.4A

㪊㪎㩷㪆㩷㪈㪍㪇

12

Image 12

Contents Model IK-WB70A Introduction FCC USA-INFORMATIONTerms and Trademarks Important Safeguards 㪊㪇㩷㪆㩷㪈㪍㪇㪊㪈㩷㪆㩷㪈㪍㪇 Precautions for Use DisclaimerCopyright and Right of Portrait Protection of Personal InformationAC adapter Speciﬁcations AC adapter DSA-20P-10Table of Contents Contents Connectors Physical descriptionFront panel General I/O Terminal BlockInternal Circuit Signal Condition Digital InputDigital Output Installation Hardware installationSetup the Network Camera over the Internet Network deploymentInternet connection via a gateway Internet connection with static IP Internet connection via PPPoE Point-to-Point over EthernetSet up the Network Camera through Power over Ethernet PoE When using a PoE hubWhen using a non-PoE hub Software installation Initial Access to the Network Camera Using web browsers㪋㪌㩷㪆㩷㪈㪍㪇 Using 3GPP-compatible mobile devices MPEG-4Main Screen with Camera View Toshiba LogoMenu Camera NameLive Video Window 㪋㪐㩷㪆㩷㪈㪍㪇㪌㪇㩷㪆㩷㪈㪍㪇 Client Settings Stream OptionsMPEG-4 Media Options MPEG-4 Protocol OptionsMP4 Saving Options Conﬁguration Deﬁnitions System ParametersSystem System TimeDI and do Security Settings Root PasswordAdd User Manage UserEnable Https HttpsCreate and Install Certiﬁcate To install a trusted create certiﬁcateTo create a self-signed certiﬁcate automatically To create a self-signed certiﬁcate manuallyCertiﬁcate Information Security Alert Network Network TypePPPoE Point-to-point over Ethernet 㪍㪉㩷㪆㩷㪈㪍㪇 Http Https Two way audioFTP Rtsp Streaming 㪍㪎㩷㪆㩷㪈㪍㪇 Ddns Dynamic domain name service DdnsAccess list Allowed list or Denied listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings AutoKeep current value Sensor Settings Privacy maskEnable WDR Wide Dynamic Range IR cut ﬁlter㪎㪋㩷㪆㩷㪈㪍㪇 Disable IR LED Audio settings Motion detection 㪎㪏㩷㪆㩷㪈㪍㪇 RS485 Settings Camera controlPreset Position Custom Command㪏㪈㩷㪆㩷㪈㪍㪇 Media Settings Application㪏㪊㩷㪆㩷㪈㪍㪇 Server Settings 㪏㪌㩷㪆㩷㪈㪍㪇㪏㪍㩷㪆㩷㪈㪍㪇 Event 㪏㪏㩷㪆㩷㪈㪍㪇 Recording Settings Recording㪐㪇㩷㪆㩷㪈㪍㪇 System log View parametersRemote Log Current LogMaintenance RebootRestore Upload or Export Daylight Saving Time Conﬁguration File Upgrade Firmware 㪐㪌㩷㪆㩷㪈㪍㪇 Troubleshooting Reboot and restoreStatus LED AudioWrong date and time Glossary Index Daylight Saving Time DSTUse Deﬁnitions Conﬁguration Speciﬁcations AWBAppearance Diagram 㪈㪇㪉㩷㪆㩷㪈㪍㪇 Technology License Notice MPEG-4 AAC TechnologyMPEG-4 Visual Technology AMR-NB StandardGNU General Public License 㪈㪇㪌㩷㪆㩷㪈㪍㪇 No Warranty END of Terms and Conditions Toshiba America Information SYSTEMS, INC