Toshiba IK-WB70A manual Motion detection

Introduction

Installation

How to Use

Definitions Configuration

Configuration Definitions (Cont.)

Motion detection

This section explains how to configure the Network Camera to enable motion detection. A total of three motion detection windows can be configured.

IK-WB70A(TCP-AV)

To enable motion detection, follow the steps below:

1.Click New to add a new motion detection window.

2.In the Window Name text box, enter a descriptive name for the motion detection window.

■To move and resize the window, drag-drop the window.

■To delete window, click X at top right of the window.

3.Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and Percentage slider bar.

4.Click Save to take effect.

5.Select Enable motion detection to enable this function.

For example:

IK-WB70A(TCP-AV)

Appendix

The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the Network Camera and are judged to exceed the defined threshold, a red bar rises. Meanwhile, the motion detection window will be outlined in red. Photos or videos can be captured instantly and configured to send to the remote server (Email, FTP) by using this feature as a trigger source. For more information on how to plot an event, refer to Application on page 57.

㪎㪎㩷㪆㩷㪈㪍㪇

52