Introduction
Installation
Configuration Definitions (Cont.)
Media name: Enter a descriptive name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip, and System log.
Snapshot: Select to send snapshots when a trigger is activated.
■Source: Select to take snapshots from stream 1 or stream 2.
■Send [#]
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Specify to capture how many images before a trigger is activated. Up to seven images can be generated.
■Send [#]
Specify to capture how many images after a trigger is activated. Up to seven images can be generated. For example, if both the Send
1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic. 14 pic. 15 pic.
How to Use
The moment the trigger
is activated.
■File Name Prefix
Enter the text for the file name.
■Add date and time suffix to the file name
Select this option to add date and time to the file name suffix.
For example:
Snapshot20090327_140744
File name prefix Date and time suffix
The format is: YYYYMMDD_HHMMSS
Definitions | Configuration |
Appendix
Video Clip: Select to send video clips when a trigger is activated.
■ Source: Select to record video clips from stream 1 or stream 2. ■
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Specify to record video clips for how many seconds before a trigger is activated. Up to nine seconds can be set.
■ Maximum duration
Specify the maximal recording duration in seconds. Up to ten seconds can be set. For example, if the
1 sec. 2 sec. 3 sec. 4 sec. 5 sec. 6 sec. 7 sec. 8 sec. 9 sec. 10 sec.
The moment the trigger
is activated.
㪏㪊㩷㪆㩷㪈㪍㪇
58