Toshiba IK-WB70A manual Https, Two way audio

Page 39

To access the Network Camera within a LAN, both HTTP port and secondary HTTP port can be used to access the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera's IP address.

In a LAN

http://192.168.4.160 or

http://192.168.4.160 : 8080

NOTE

●To use HTTP authentication, make sure that there is set a password for the Network Camera ﬁrst; refer to Security Settings on page 30 for details.

HTTPS

By default, the HTTPS port is set to 443. It can be assigned with another port number between 1025 and 65535.

Two way audio

By default, the two way audio port is set to 5060. It can be assigned with another port number between 1025 and 65535.

The Network Camera supports two way audio communication so that operators can transmit and receive audio simultaneously. By using the Network Camera's built- in microphone and an external speaker, you can communicate with people near the Network Camera.

Introduction

Installation

How to Use

Deﬁnitions

Conﬁguration

Appendix

㪍㪋㩷㪆㩷㪈㪍㪇

39

Image 39

Contents Model IK-WB70A FCC USA-INFORMATION IntroductionTerms and Trademarks Important Safeguards 㪊㪇㩷㪆㩷㪈㪍㪇㪊㪈㩷㪆㩷㪈㪍㪇 Protection of Personal Information Precautions for UseDisclaimer Copyright and Right of PortraitAC adapter AC adapter DSA-20P-10 SpeciﬁcationsTable of Contents Contents General I/O Terminal Block ConnectorsPhysical description Front panelInternal Circuit Signal Condition Digital InputDigital Output Hardware installation InstallationSetup the Network Camera over the Internet Network deploymentInternet connection via a gateway Internet connection via PPPoE Point-to-Point over Ethernet Internet connection with static IPSet up the Network Camera through Power over Ethernet PoE When using a PoE hubWhen using a non-PoE hub Software installation Using web browsers Initial Access to the Network Camera㪋㪌㩷㪆㩷㪈㪍㪇 MPEG-4 Using 3GPP-compatible mobile devicesCamera Name Main Screen with Camera ViewToshiba Logo MenuLive Video Window 㪋㪐㩷㪆㩷㪈㪍㪇㪌㪇㩷㪆㩷㪈㪍㪇 MPEG-4 Protocol Options Client SettingsStream Options MPEG-4 Media OptionsMP4 Saving Options System Time Conﬁguration DeﬁnitionsSystem Parameters SystemDI and do Manage User Security SettingsRoot Password Add UserHttps Enable HttpsTo create a self-signed certiﬁcate manually Create and Install CertiﬁcateTo install a trusted create certiﬁcate To create a self-signed certiﬁcate automaticallyCertiﬁcate Information Security Alert Network Type NetworkPPPoE Point-to-point over Ethernet 㪍㪉㩷㪆㩷㪈㪍㪇 Http Two way audio HttpsFTP Rtsp Streaming 㪍㪎㩷㪆㩷㪈㪍㪇 Ddns Ddns Dynamic domain name serviceAccess list Allowed list or Denied listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings AutoKeep current value Privacy mask Sensor SettingsIR cut ﬁlter Enable WDR Wide Dynamic Range㪎㪋㩷㪆㩷㪈㪍㪇 Disable IR LED Audio settings Motion detection 㪎㪏㩷㪆㩷㪈㪍㪇 Camera control RS485 SettingsCustom Command Preset Position㪏㪈㩷㪆㩷㪈㪍㪇 Application Media Settings㪏㪊㩷㪆㩷㪈㪍㪇 Server Settings 㪏㪌㩷㪆㩷㪈㪍㪇㪏㪍㩷㪆㩷㪈㪍㪇 Event 㪏㪏㩷㪆㩷㪈㪍㪇 Recording Recording Settings㪐㪇㩷㪆㩷㪈㪍㪇 Current Log System logView parameters Remote LogMaintenance RebootRestore Upload or Export Daylight Saving Time Conﬁguration File Upgrade Firmware 㪐㪌㩷㪆㩷㪈㪍㪇 Audio TroubleshootingReboot and restore Status LEDWrong date and time Daylight Saving Time DST Glossary IndexUse Deﬁnitions Conﬁguration AWB SpeciﬁcationsAppearance Diagram 㪈㪇㪉㩷㪆㩷㪈㪍㪇 AMR-NB Standard Technology License NoticeMPEG-4 AAC Technology MPEG-4 Visual TechnologyGNU General Public License 㪈㪇㪌㩷㪆㩷㪈㪍㪇 No Warranty END of Terms and Conditions Toshiba America Information SYSTEMS, INC