Toshiba IK-TF5U instruction manual Operation, Automatic Black Balance, White Balance

Page 8

5. OPERATION

A camera head “IK-TF5H” is supposed to be connected to this camera control unit from this section.

1Refer to the item " 4. CONNECTION", connect each equipment correctly.

2Turn on the connected equipment and the power source of the camera.

3When using the camera for the first time and when replacing the camera cable and the camera head, be sure to operate the ABB adjustment refer to the item "Automatic Black Barance".

4Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc..

5Refer to the item "5.1 White Balance", make the adjustment.

6Refer to the items "7. MODE SETTING BY ON SCREEN DISPLAY", select the necessary items.

5. 1 Automatic Black Balance

Black balance adjustment is necessary to get the correct black picture level.

•Close the lens iris and put the lens cover on.

•If the index menu/menu is displayed, press the [DISP] button to disable or the character display.

•Hold the [DATA DOWN] button for approx. 1 second.

•When the black balance adjustment operation starts, the character ABB blinks on the screen.

•When the black balance adjustment operation finishes, the character ABB stops blinking and the result appears for approx. 1 second.

•When the black balance adjustment performed, set the electronic shutter, Synchro. Scan, partial read to OFF, and do not operate trigger mode or external sync.

•When using the camera for the first time and when replacing the camera cable and the camera head, be sure to operate the ABB adjustment refer to the item "Automatic Black Barance".

Display

Meaning

ABB OK

Automatic black balance adjustment finished correctly.

ABB NG

Automatic black balance adjustment cannot be performed because the

CLOSE LENS

lens iris is open. Close the lens iris.

ABB NG

Automatic black balance adjustment cannot be performed.

 

Operate the automatic black balance again.

5. 2 White Balance

For the white balance adjustment of this unit, AWB (Automatic White Balance) and MANU (Manual white balance) adjustments are provided. To select the desired mode, refer to the items "7.2 (3) WHT BAL (White balance)" and "7. MODE SETTING BY ON SCREEN DISPLAY".

 

AWB

MANU

 

(Automatic White Balance)

(Manual White Balance)

Outline

Adjust white balance by displaying the

Adjust the white balance manually using

 

white object inside the area set by AWB

the WHT BAL menu while shooting the

 

menu and pressing the [DATA UP] button.

white object.

Note

When the shutter mode is E.TRG, AWB is

Adjustment is performed by confirming

 

not available.

with a monitor etc.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents IK-TF5U Following information is only for EU-member statesSafety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty placesTable of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Result displayed Meaning Temp LOWOFF GainShading Correction Items Controlled by the Screen Display Available selectionsDisp Mode Setting by the Screen DisplayUsing the Menus Menus Shutter Electronic shutterManual Flicker may be largeChanging the setting in Manu mode Mode = ManualPartial scanning setting Menu UP, Down Data UP, DownChanging the shutter speed setting Changing the setting in SS synchro. scan modeMode = SS Changing the setting in E.TRG mode Changing the setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing the setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRMode = E.TRG E.TRG = RR Changing the setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing the setting in GainChanging the gain in Manu mode WHT BAL White balance MANU/OFF Changing gamma correctionChanging master pedestal Changing R pedestalSync OptionSetting by the frame Returning to factory settingsSetting by 1H Synchro. Scan Operation1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingE. TRG External trigger Fval Lval Dval1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output TimingPW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingLong Term Exposure RR Reset restartInput Timing Chart Example When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning onExternal sync signal polarity Using the unit with external sync signalExternal Sync External sync frequency rangeInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCDSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Limited Warranty Toshiba CCD Camera One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities
Top Page Image Contents