Toshiba IK-TF5U instruction manual Result displayed Meaning, Temp LOW

Page 9

1AWB (Automatic white balance)

•Set the MODE to AWB on the WHT BAL menu.

Perform the C.TEMP (color temperature conversion) setting, if necessary. (Refer to the item "7.2 (3) WHT BAL (White balance)".)

3200K : Appropriate for indoor shooting.

5600K : Appropriate for outdoor shooting.

•If the index menu/menu is displayed, press the [DISP] button to disable the character display on the menu.

•Shoot a known white object that fills the screen and push [DATA UP] button for approx. 1 second.

•The character AWB blinks on the screen when the AWB starts.

•The character AWB stops blinking when the AWB finishes, and the result is displayed for approx. 1 second.

Result displayed

Meaning

AWB OK

Automatic white balance adjustment finished correctly.

AWB NG LEVEL

Automatic white balance adjustment cannot be performed because the

LOW

video level is too low.

 

Obtain the proper video level.

AWB NG

Automatic white balance adjustment cannot be performed because the

LEVEL HIGH

video level is too high.

 

Obtain the proper video level.

AWB NG

Automatic white balance adjustment cannot be performed because the

C. TEMP LOW

color temperature is too low.

 

If the C.TEMP is set to 5600K, set to 3200K.

 

If the message appears with the C.TEMP set to 3200K, change the

 

illumination or use a color temperature conversion filter.

AWB NG

Automatic white balance adjustment cannot be performed because the

C. TEMP HIGH

color temperature is too high.

 

If the C.TEMP is set to 3200K, set to 5600K.

 

If the message appears with the C.TEMP set to 5600K, change the

 

illumination or use the color temperature conversion filter.

AWB NG

Automatic white balance adjustment cannot be performed because the

NOT AVAILABLE

shutter speed mode is E.TRG mode.

AWB NG

Automatic white balance adjustment cannot be performed for other

 

reasons. Such as no white area is included in an object, etc.

2MANU (Manual white balance)

•Set the MODE to MANU on the WHT BAL menu. (Refer to the item "7.2 (3) WHT BAL (white balance)".)

•Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor etc.

(Refer to the item "7.2 (3) (3.2) Changing each setting in MANU (Manual) mode".)

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Following information is only for EU-member states IK-TF5USafety Precautions Avoid placing in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection Operation Automatic Black BalanceWhite Balance Temp LOW Result displayed MeaningGain Shading CorrectionOFF Available selections Items Controlled by the Screen DisplayMode Setting by the Screen Display Using the MenusDisp Shutter Electronic shutter MenusManual Flicker may be largeMode = Manual Changing the setting in Manu modePartial scanning setting Menu UP, Down Data UP, DownChanging the setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the setting in 1P SNR mode Changing the setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging the setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing the setting in PW SNR modeChanging the setting in PW SR mode Mode = E.TRG E.TRG = PW SRMode = E.TRG E.TRG = RR Changing the setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestalOption SyncReturning to factory settings Setting by the frameSetting by 1H Synchro. Scan Operation1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetPulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETRR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onUsing the unit with external sync signal External sync signal polarityExternal Sync External sync frequency rangeInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD SpecificationsExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked One 1 Year Limited Warranty of Labor and Parts Limited Warranty Toshiba CCD CameraHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities
Top Page Image Contents