Toshiba IK-TF5U instruction manual Changing the setting in 1P SR mode, Mode = E.TRG E.TRG = 1P SR

Page 17

(1. 3. 2) Changing the setting in 1P SR mode

Move up down

Select the desired

by pushing

value by pushing

MENU UP, DOWN

DATA UP, DOWN

-- SHUTTER --

MODE

E.TRG

E.TRG

1P SR

TRG.P

EXP.

16ms

PART

OFF

<MODE = E.TRG E.TRG = 1P SR>

•Sutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at 1P SNR and 1P SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Exposure time setting at 1P SNR and 1P SR

0.01ms0.02 ms 0.4 ms 1 ms16 ms

0.01 ms	0.02 ms	0.1 ms	1 ms
step	step	step	step

•Partial scanning switch OFF/90fps/115fps/120fps/160fps/180fps/240fps/ E90fps/E115fps/E120fps/E160fps/E180fps/E240fps

(a) Changing the polarity of inputting trigger pulse setting

1Move the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing 1P SR exposure time setting

1Move the "→" to EXP. by pushing [MENU UP], [MENU DOWN] buttons.

2Select the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

(c) Changing the partial scanning setting

1Move the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

17

Image 17

Contents Following information is only for EU-member states IK-TF5USafety Precautions Avoid placing in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Temp LOW Result displayed MeaningOFF GainShading Correction Available selections Items Controlled by the Screen DisplayDisp Mode Setting by the Screen DisplayUsing the Menus Shutter Electronic shutter MenusManual Flicker may be largeMode = Manual Changing the setting in Manu modePartial scanning setting Menu UP, Down Data UP, DownChanging the shutter speed setting Changing the setting in SS synchro. scan modeMode = SS Changing the setting in 1P SNR mode Changing the setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing the setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Mode = E.TRG E.TRG = PW SNR Changing the setting in PW SNR modeMode = E.TRG E.TRG = RR Changing the setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing the setting in GainChanging the gain in Manu mode WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestalOption SyncReturning to factory settings Setting by the frameSetting by 1H Synchro. Scan Operation1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetPulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETLong Term Exposure RR Reset restartInput Timing Chart Example Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onUsing the unit with external sync signal External sync signal polarityExternal Sync External sync frequency rangeInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart RGB, 3CCD SpecificationsSymptom Items to be checked External Appearance DiagramBefore Making a Service Call One 1 Year Limited Warranty of Labor and Parts Limited Warranty Toshiba CCD CameraHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities