Toshiba IK-TF7 instruction manual Changing each setting in 1P SR mode, Mode = E.TRG E.TRG = 1P SR

Page 15

(1. 3. 2) Changing each setting in 1P SR mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	1P SR
TRG.P
TRG.P
EXP.	16ms
PART	OFF

<MODE = E.TRG E.TRG = 1P SR>

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at 1P SNR and 1P SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Exposure time setting at 1P SNR and 1P SR

0.01ms0.02 ms0.4 ms1 ms16 ms

0.01 ms	0.02 ms	0.1 ms	1 ms
step	step	step	step

• Partial scanning switch OFF/60fps/90fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→ " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b)Changing 1P SR exposure time setting

1Set the "→ " to EXP. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

(c) Changing the partial scanning setting

1Set the "→ " to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons.

15

IK-TF7(E)

Page 15

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 15

Contents For Customer Use IK-TF7Safety Precautions Disclaimer Table of Contents Components Available selectins Items Controlled by Using on Screen DisplayNames and Functions Connector Pin Assignments ConnectionStandard Connection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance OutlineOFF Shutter speed mode is E.TRG modeGain Shading CorrectionDisp Mode Setting by on Screen DisplayUsing the Menues Power onShutter Electronic shutter Changing each setting in Manu modePartial scanning setting MenusChanging each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR modeMode = E.TRG E.TRG = PW SR Changing each setting in PW SR modeChanging the gain in Manu mode Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing each setting in GainWHT BAL White balance Changing B pedestal Changing shading correction modeChanging master pedestal Changing R pedestalChanging RGB Sync Adjusting horizontal phaseSync OptionExternal Sync Setting to factory setting statusExternal sync signal input conditions Shutter mode HD input VD inputSynchro. Scan Operatin Setting by the frameUsing the unit with external sync signal Setting by 1HEXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non ResetVD OUT*3 Video Index 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingVD OUT*3 Video OUT Video Index RR Reset restartInput Timing Chart Example Long Term ExposurePartial Scanning on When Partial Scanning Mode is onPartial Scanning Partial Scanning OFF All pixels scanningInput Output Signal Specificatoins CCD CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Vertical Output Waveform Timing ChartSpecifications RGB, 3CCDHD, VD, Index External Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division