Toshiba IK-TF7 Gain Video gain, Changing each setting in RR mode, Mode = E.TRG E.TRG = RR

Page 18

(1. 3. 5) Changing each setting in RR mode

Move up down				Set by pushing
By pushing				Set by pushing
By pushing				DATA UP, DOWN
MENU UP, DOWN				DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	RR
PART	OFF

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

• Partial scanning switch OFF/60fps/90fps

<MODE = E.TRG E.TRG = RR>

(a) Changing the partial scanning setting

1Set the "→ " to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

( 2 ) GAIN (Video gain)

GAIN has two modes; MANU, OFF.

Set the "→ " to MODE, push the [DATA UP], [DATA DOWN], and select mode among MANU, OFF. In the OFF mode, gain is fixed to 0dB.

(2. 1) Changing each setting in GAIN

Move up down By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

		-- GAIN --
		MODE	MANU


		MANU	0dB

• Gain mode MANU, OFF

• Manual gain -3 dB to 18 dB (10 dB step)

(a) Changing the gain in MANU mode

1Set the "→ " to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the manual gain by pushing [DATA UP], [DATA DOWN] buttons.

18

IK-TF7(E)

Page 18

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 18

Contents IK-TF7 For Customer UseSafety Precautions Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selectinsNames and Functions Connector Pin Assignments ConnectionStandard Connection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is E.TRG modeGain OFFPower on Mode Setting by on Screen DisplayUsing the Menues DispMenus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutterChanging each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time setting Changing each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SR Changing 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu modeWHT BAL White balance Changing R pedestal Changing shading correction modeChanging master pedestal Changing B pedestalOption Adjusting horizontal phaseSync Changing RGB SyncShutter mode HD input VD input Setting to factory setting statusExternal sync signal input conditions External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Synchro. Scan Operatin1P SNR 1 Pulse Trigger Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingVD OUT*3 Long Term Exposure RR Reset restartInput Timing Chart Example Video OUT Video IndexPartial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Scanning Partial Scanning onInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart CCDSpecifications RGB, 3CCDHD, VD, Index External Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division