Toshiba IK-TF7 instruction manual VD OUT Video Index

Page 28

(3. 2) Pulse Width Trigger SYNC-NON RESET Picture Output Timing (at Time of Internal Sync)

Negative polarity mode

Trigger*1

Positive polarity mode

About 1 ∝ s

About 7 ∝ s

Exposure period*2

Exposure period*2

VD OUT*3

VIDEO INDEX

Video output

796H

(Partial scanning OFF)

387H

(Partial scanning 60fps)

258H

(Partial scanning 90fps)

*1:

Externally input signal

*2:

Exposure time = Trigger pulse width + 6 ∝ s

(Valid trigger pulse width is 2 ∝ s or greater for external trigger shutter operation.)

*3: As long as there is no external sync input, the internal VD will be output when SJ01 is set to HD/VD output position.

*4: Video is output at the falling edge of the internal VD following completion of the exposure period. The video and the VIDEO INDEX have a paired relationship.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

28

IK-TF7(E)

Page 28

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 28

Contents IK-TF7 For Customer UseSafety Precautions Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selectinsNames and Functions Connection Connector Pin AssignmentsStandard Connection Operation White BalanceAutomatic White Balance Manual White Balance Outline Result displayed MeaningShutter speed mode is E.TRG mode GainShading Correction OFFMode Setting by on Screen Display Using the MenuesPower on DispChanging each setting in Manu mode Partial scanning settingMenus Shutter Electronic shutterMode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingMode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in RR mode Mode = E.TRG E.TRG = RRChanging each setting in Gain Changing the gain in Manu modeWHT BAL White balance Changing shading correction mode Changing master pedestalChanging R pedestal Changing B pedestalAdjusting horizontal phase SyncOption Changing RGB SyncSetting to factory setting status External sync signal input conditionsShutter mode HD input VD input External SyncSetting by the frame Using the unit with external sync signalSetting by 1H Synchro. Scan Operatin1P SNR 1 Pulse Trigger Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETVD OUT*3 RR Reset restart Input Timing Chart ExampleLong Term Exposure Video OUT Video IndexWhen Partial Scanning Mode is on Partial ScanningPartial Scanning OFF All pixels scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart CCDRGB, 3CCD SpecificationsHD, VD, Index Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division