Toshiba IK-TF7 Changing each setting in PW SNR mode, Mode = E.TRG E.TRG = PW SNR

Page 16

(1. 3. 3) Changing each setting in PW SNR mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SNR
TRG.P
TRG.P
PART	OFF

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

• Partial scanning switch OFF/60fps/90fps

<MODE = E.TRG E.TRG = PW SNR>

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→ " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

1Set the "→ " to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

16

IK-TF7(E)

Page 16

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Image 16

Contents IK-TF7 For Customer UseSafety Precautions Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selectinsNames and Functions Connection Connector Pin AssignmentsStandard Connection Operation White BalanceAutomatic White Balance Manual White Balance Outline Result displayed MeaningShutter speed mode is E.TRG mode GainShading Correction OFFMode Setting by on Screen Display Using the MenuesPower on DispChanging each setting in Manu mode Partial scanning settingMenus Shutter Electronic shutterMode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingMode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in RR mode Mode = E.TRG E.TRG = RRChanging each setting in Gain Changing the gain in Manu modeWHT BAL White balance Changing shading correction mode Changing master pedestalChanging R pedestal Changing B pedestalAdjusting horizontal phase SyncOption Changing RGB SyncSetting to factory setting status External sync signal input conditionsShutter mode HD input VD input External SyncSetting by the frame Using the unit with external sync signalSetting by 1H Synchro. Scan Operatin1P SNR 1 Pulse Trigger Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetVD OUT PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETVD OUT*3 RR Reset restart Input Timing Chart ExampleLong Term Exposure Video OUT Video IndexWhen Partial Scanning Mode is on Partial ScanningPartial Scanning OFF All pixels scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart CCDRGB, 3CCD SpecificationsHD, VD, Index Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division