Toshiba IK-TF7 instruction manual Safety Precautions

Page 2

SAFETY PRECAUTIONS

Read the following safety precautions carefully before using this product. These instructions contain valuable information on safe and proper use that will prevent harm and damage to the operator and other persons. Make sure that you fully understand the following details (indications, graphic sym- bols) before proceeding to the remaining sections in this manual.

Indication definitions

Indication

Meaning

 

 

 

This indicates the existence of a haz-

 

ard that death or catastrophic bodily

Warning

injury*1 may result from improper

 

use.

 

This indicates the existence of a haz-

 

ard that bodily injury*2 or property

Caution

damage*3 may result from improper

use.

 

 

 

*1: Catastrophic bodily injury means loss of eye- sight, burns (high and low temperatured),

Graphic symbol definitions

Symbol

Meaning

“” indicates a prohibited action that must not be carried out. The actual prohibited action is indicated in the symbol or nearby graphically or de- scribed in text.

“” indicates a mandatory action that must be carried out. The actual instruction is indicated in the sym- bol or nearby graphically or de- scribed in text.

shock, fracture, poisoning, etc. which leaves a sequela and require hospitalization or prolonged treatment.

*2: Bodily injury means injuries, burns and electric shock which does not require hospitalization or prolonged treatment.

*3: Property damage means extended harm to home, household effects, domesticated animals, and pets.

Warning

•Stop operation immediately when any abnormality or defect occurs.

Use during an abnormal condition; such as emitting smoke, burning odors, damage from dropping invasion of foreign objects, etc. may cause fire and/or electric shock. Be always sure to disconnect the power plug from the electrical outlet (socket) at once and contact your dealer.

• Avoid installing in a shower room or a bathroom. This may cause fire and/or electric shock.

• Do not operate in places with possibility of becoming wet. This may cause fire and/or electric shock.

•Do not repair, disassemble and/or modify by yourself.

This may cause fire and/or electric shock. Be always sure to contact your dealer for internal repair, check and cleaning of the product.

• Use the specified power supply.

Otherwise, a fire or an electric shock may occur.

•Don’t place things or materials on the unit.

Ingress of foreign materials such as metallic things and liquid into the unit may cause a fire or an electric shock.

•Do not put the product in an unstable, slanting and/or vibrated place. Drop and/or fail of the product may cause injury.

•Do not touch the power cord or other connection cables during a thunderstorm. This might cause electric shock.

2

IK-TF7(E)

Page 2

2004.03.24, 0:59 PMAdobe PageMaker 6.5J/PPC

Page 1 Page 3
Image 2
Page 1 Page 3
Contents IK-TF7 For Customer UseSafety Precautions Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selectinsNames and Functions Standard Connection Connector Pin AssignmentsConnection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is E.TRG modeGain OFFPower on Mode Setting by on Screen DisplayUsing the Menues DispMenus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutterChanging the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu modeWHT BAL White balance Changing R pedestal Changing shading correction modeChanging master pedestal Changing B pedestalOption Adjusting horizontal phaseSync Changing RGB SyncShutter mode HD input VD input Setting to factory setting statusExternal sync signal input conditions External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Synchro. Scan Operatin1P SNR 1 Pulse Trigger Sync Non Reset EXT Trig External triggerVD OUT*3 Video Index VD OUT 1P SR 1 Pulse Trigger Sync Reset1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset VD OUT Video Index VD OUT*3 PW SR Pulse width trigger SYNC-RESET1 Pulse Width Trigger SYNC-RESET Picture Output Timing Long Term Exposure RR Reset restartInput Timing Chart Example Video OUT Video IndexPartial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Scanning Partial Scanning onInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart CCDHD, VD, Index SpecificationsRGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service
Top Page Image Contents