Metz SCA 3202-M manual Flash unit, Automatic motor zoom control

f-number (e.g. f/8 instead of f/11) or the distance to the subject or to the reflecting surface (for example, when bouncing the flash) must be re- ￿ duced. Please observe the maximum flash range

of the flash unit.

Some types of flash units (e.g. 40 MZ-3 / -3i,

50 MZ-5, 54 MZ-..., 70 MZ-5 and 76 MZ-5 digi) may give an acoustic „Beep“ signal in addition to the display. See the operating instructions of the individual flash unit.

☞For system induced reasons, correct exposure confirmation of the flash unit is only fully sup- ported by the mecablitz 40 MZ..., 44 MZ-2, 45 CL-4 digi, 50 MZ-5, 54 MZ-... , 70 MZ-.... and 76 MZ-5 digi.

4.5Automatic motor zoom control

On flash units with motor zoom reflector (e.g. 40 MZ-..., 44 MZ-..., 54 MZ-... , 70 MZ-... and 76 MZ-5 digi the reflector’s coverage angle, i.e. the reflector’s position, is automatically adapted to the focal length of the camera lens.

After the flash unit has been switched on the „Auto Zoom“ mode is automatically selected if the camera is on and activated by touching the shut- ter release.

In combination with some cameras, the flash unit’s zoom reflector may be extended further than required for the focal length of the lens. A manual correction of the reflector’s zoom position, how- ever, will not be necessary!

21