Axis Communications 223M user manual Live View, Layout

Page 10

10AXIS 223M - Accessing the Camera

Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in any light conditions.

The Live View page

Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.

The Video format drop-down list allows the video format on the Live View page to be temporarily changed.

The Output buttons, Pulse and Active/Inactive below, control the output directly from the Live View page. These buttons are configured under Setup > Live View Config >

Layout.

Pulse - click this button to activate the output for a defined period of time, e.g. to switch on a light for 20 seconds.

Active/Inactive - click these buttons to manually start and stop a connected device, e.g. switch a light on/off.

These buttons start and stop the Sequence Mode. This mode is created in Setup > Live View Config > Sequence mode, and automatically displays the view from two or more video sources at set intervals.

From the Source list, select the desired external video source. Note that Sequence Mode must be stopped before selecting a source from this list.

The Trigger buttons can trigger an event directly from the Live View page. These are configured under Setup > Live View Config > Layout.

The Snapshot button saves a snapshot of the image currently being displayed. Right-click on the video image to save it in JPEG format on your computer. This button is intended for use when the AMC viewer toolbar is not available.

If you have Video format set to Motion JPEG, you can use the View size buttons to either reduce the image to 800 pixels in width or return the image to full scale. To view the View size buttons, Setup > Video & Image > Resolution must also be set to greater than 800 x 600 pixels.

The AMC (AXIS Media Control) viewer toolbar is available in Microsoft Internet Explorer only. It displays the following buttons:

Play/Stop buttons - start and stop the live video stream.

Image 10

Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Overview LED Accessing the Camera Access from a browserAccessing the camera from the Internet Setting the root passwordSetting the focus Live View LayoutAMC Audio controls Video stream types Video StreamsMotion Jpeg How to stream MPEG-4 MPEG-4 protocols and communication methodsAxis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Setup Tools Accessing the setup tools from a browserImage settings Video and Image SettingsImage appearance Video stream Text overlay settingsTest Overlay/Mask type Overlay/Mask settingsUpload and use an overlay/mask Camera Settings Advanced settingsOverlay image requirements MPEG-4 Settings Mjpeg Settings Audio Channels Audio mode Audio Settings Enable AudioAudio Audio Input Audio Output Live View Config Use custom settingsUpload Own Web Files Own HomeOutput Buttons User Defined LinksAction Buttons Example Check Show custom LinkViewer Settings Default Video FormatDefault Viewer Html ExamplesSequence Mode External VideoEvent Servers Event ConfigurationDefinitions Triggered event Configuring Event TypesHow to set up a triggered event Click Add triggered... on the Event TypesPre-trigger and Post-trigger buffers Scheduled EventSettings Camera TamperingMotion Detection Port Status Object size, history and sensitivitySecurity IP Address Filtering System OptionsSecurity Users ReferralsSecurity Https Security Authentication process CA serversIP Address Configuration Network Basic TCP/IP SettingsDate & Time DNS Configuration Network Advanced TCP/IP SettingsServices NTP ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT Traversal Network Socks Network TrafficQoS Settings Network QoS Quality of ServiceNetwork Smtp email Network RTP Multicast/MPEG-4 Network SnmpNetwork UPnP Network BonjourSupport LED SettingsMaintenance Support OverviewAdvanced Logs & ReportsAbout Resetting to the factory default settings Using the Control ButtonUnit Connectors Terminal connectorTerminal connector pinout table Terminal connector schematic diagramPower connector block Power connectionsSchematic diagram Power terminal block and Power connectors RS-232 connector Checking the firmware TroubleshootingBasic Configuration Upgrading the firmwareEmergency recovery procedure Axis supportSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Replacing the lens Removing and attaching the lensTechnical Specifications LensUsers System integration General performance considerations Optimizing your systemFrame rates Motion Jpeg and MPEG-4 BandwidthAxis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Index Axis 223M IndexRtsp