36AXIS 223M - Event Configuration
Object size, history and sensitivity:
| Object Size | History | Sensitivity |
|
|
|
|
High level | Only very large objects | An object that appears in the region will trigger | Ordinary colored objects on ordinary back- |
| trigger motion detection | the motion detection for a long period | grounds will trigger the motion detection |
|
|
|
|
Low level | Even very small objects | An object that appears in the region will trigger | Only very bright objects on a dark back- |
| trigger motion detection | motion detection for only a very short period | ground will trigger motion detection |
|
|
|
|
Default value | Low | Medium to High | Medium to High |
|
|
|
|
Examples:
•Avoid triggering on small objects in the video image by setting the Object Size level to high.
•To reduce the number of triggers if there is a lot of movement during a short period of time, select a high History level.
•To only detect flashing light, low Sensitivity can be selected. In other cases, a high Sensitivity level is recommended.
Port Status
Under Event Configuration > Port Status there is a list showing the status for the camera’s input and output. This is for the benefit of Operators, who cannot access the System Options section.
Example: If the Normal state for a door push button connected to an input is set to Open circuit - as long as the button is not pushed, the state will be inactive. If the doorbell button is pushed, the state of the input changes to active.