Axis Communications 223M user manual AMC Audio controls

AXIS 223M - Accessing the Camera 11

The Snapshot button saves a snapshot of the video image currently being displayed. The Snapshot function and the target directory for saving snapshots can be configured from the AMC Control Applet in the Windows Control Panel (Internet Explorer only).

The record button is used to record the current (MPEG-4) video stream. The location where the image file is saved can be specified using the AMC control panel. To enable recording, Select Live View Config > Viewer Settings > Enable recording button.

Click the View Full Screen button to make the video image fill the entire screen area. No other windows will be visible. Press Esc (Escape) on the computer keyboard to exit full screen.

AMC Audio controls

There are audio controls for controlling the client computer’s speaker output. These controls are only available when audio is enabled, see The AXIS Media Control, on page 14 and Audio, on page 23.

Click the Speaker and Microphone buttons to switch the sound off and on for the speaker and microphone, respectively.

Use the sliders to control the volume on the speaker and microphone. The volume can be set between 0 and 100.

When using Half-duplexmode, this button toggles between allowing you to speak and listen. The first icon indicates that you can talk and the speaker attached to the camera will play your voice. The second indicates that you will hear audio from the camera, but no audio will be sent to any web clients.

When in simplex talk mode, the icon toggles between allowing you to speak and is dimmed when you do not want other clients to receive any audio.