Axis Communications 223M LED Settings, Maintenance, Support Overview, System Overview

Page 47

AXIS 223M - System Options 47

LED Settings

The Status and Network Indicator LEDs can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help.

Note: The LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

Restart - The unit is restarted without changing any of the settings. Use this method if the unit is not behaving as expected.

Restore - The unit is restarted and most current settings are reset to the factory default values. The only settings saved are:

the boot protocol (DHCP or static)

the static IP address

the default router

the subnet mask

the system time

Default - The Default button should be used with caution. Pressing this button will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be re-installed.

Upgrade Server - See Upgrading the firmware, on page 55.

Backup - To take a backup of all of the parameters, and any user-defined scripts, click the Backup button. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior.

Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button. The settings will be restored to the previous configuration.

Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration of multiple units or for firmware upgrades.

Support

Support Overview

The Support Overview page provides valuable information on troubleshooting and contact information, should you require technical assistance.

System Overview

The System Overview page provides an overview of the current network, security, event and camera settings.

Image 47
Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Overview LED Access from a browser Accessing the CameraSetting the focus Setting the root passwordAccessing the camera from the Internet Layout Live ViewAMC Audio controls Motion Jpeg Video StreamsVideo stream types MPEG-4 protocols and communication methods How to stream MPEG-4RTP/RTSP/HTTP or RTP/RTSP/HTTPS Other methods of accessing the video streamAxis Media Control Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage appearance Video and Image SettingsImage settings Test Text overlay settingsVideo stream Upload and use an overlay/mask Overlay/Mask settingsOverlay/Mask type Overlay image requirements Advanced settingsCamera Settings MPEG-4 Settings Mjpeg Settings Audio Audio Settings Enable AudioAudio Channels Audio mode Audio Input Audio Output Use custom settings Live View ConfigOwn Home Upload Own Web FilesExample Check Show custom Link User Defined LinksAction Buttons Output ButtonsHtml Examples Default Video FormatDefault Viewer Viewer SettingsExternal Video Sequence ModeDefinitions Event ConfigurationEvent Servers Click Add triggered... on the Event Types Configuring Event TypesHow to set up a triggered event Triggered eventScheduled Event Pre-trigger and Post-trigger buffersCamera Tampering SettingsMotion Detection Object size, history and sensitivity Port StatusReferrals System OptionsSecurity Users Security IP Address FilteringSecurity Https Security CA servers Authentication processDate & Time Network Basic TCP/IP SettingsIP Address Configuration NTP Configuration Network Advanced TCP/IP SettingsServices DNS ConfigurationNAT Traversal Host Name ConfigurationLink-Local IPv4 Address Network Traffic Network SocksNetwork Smtp email Network QoS Quality of ServiceQoS Settings Network Bonjour Network SnmpNetwork UPnP Network RTP Multicast/MPEG-4Support Overview LED SettingsMaintenance SupportLogs & Reports AdvancedAbout Using the Control Button Resetting to the factory default settingsTerminal connector Unit ConnectorsTerminal connector schematic diagram Terminal connector pinout tableSchematic diagram Power terminal block and Power connectors Power connectionsPower connector block RS-232 connector Upgrading the firmware TroubleshootingBasic Configuration Checking the firmwareAxis support Emergency recovery procedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Removing and attaching the lens Replacing the lensLens Technical SpecificationsUsers System integration Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Axis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Axis 223M Index IndexRtsp