Axis Communications 223M user manual Led

Page 7

AXIS 223M - Product Features 7

Network connector - The AXIS 223M connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 223M via Power over Ethernet (PoE). The camera also negotiates the correct power level when using PoE.

Audio output - Audio output (line level), which can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A 3.5mm audio connector must be used for the audio out.

Audio input - One 3.5mm input for a mono microphone, or for line-in mono signal (only the left channel is used from a stereo signal).

RS-232 connector - Single 9-pin D-SUB RS-232 connector, max 115 kbit/s, half-duplex.

Serial number - This number is used during installation.

Reset/Control button - Press this button to install the camera using the AXIS Internet Dynamic DNS Service, or to restore the camera to its factory default settings, as described in Advanced, on page 48.

LED indicators - After completion of the startup and self test routines, the multi-colored Network, Status, and Power LED indicators flash as follows:

LED	Color	Description

Network	Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.

	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.

	Unlit	No connection.
		Note: The Network LED can be configured to be unlit during normal operation. See the online
		help files for more information. Go to Setup > System Options > LED settings.

Status	Green	Shows steady green for normal operation.
		Note: The Status LED can be configured to be unlit during normal operation, or to flash only
		when the camera is accessed. See the online help files for more information. Go to Setup >
		System Options > LED settings.

	Amber	Steady during startup, reset to factory default or when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Image 7

Contents Axis 223M Network Camera User’s Manual About this Document Contents Axis 223M Product Features Overview LED Access from a browser Accessing the CameraAccessing the camera from the Internet Setting the root passwordSetting the focus Layout Live ViewAMC Audio controls Video stream types Video StreamsMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4Axis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the setup tools from a browser Setup ToolsImage settings Video and Image SettingsImage appearance Video stream Text overlay settingsTest Overlay/Mask type Overlay/Mask settingsUpload and use an overlay/mask Camera Settings Advanced settingsOverlay image requirements MPEG-4 Settings Mjpeg Settings Audio Channels Audio mode Audio Settings Enable AudioAudio Audio Input Audio Output Use custom settings Live View ConfigOwn Home Upload Own Web FilesExample Check Show custom Link User Defined LinksAction Buttons Output ButtonsHtml Examples Default Video FormatDefault Viewer Viewer SettingsExternal Video Sequence ModeEvent Servers Event ConfigurationDefinitions Click Add triggered... on the Event Types Configuring Event TypesHow to set up a triggered event Triggered eventScheduled Event Pre-trigger and Post-trigger buffersCamera Tampering SettingsMotion Detection Object size, history and sensitivity Port StatusReferrals System OptionsSecurity Users Security IP Address FilteringSecurity Https Security CA servers Authentication processIP Address Configuration Network Basic TCP/IP SettingsDate & Time NTP Configuration Network Advanced TCP/IP SettingsServices DNS ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT Traversal Network Traffic Network SocksQoS Settings Network QoS Quality of ServiceNetwork Smtp email Network Bonjour Network SnmpNetwork UPnP Network RTP Multicast/MPEG-4Support Overview LED SettingsMaintenance SupportLogs & Reports AdvancedAbout Using the Control Button Resetting to the factory default settingsTerminal connector Unit ConnectorsTerminal connector schematic diagram Terminal connector pinout tablePower connector block Power connectionsSchematic diagram Power terminal block and Power connectors RS-232 connector Upgrading the firmware TroubleshootingBasic Configuration Checking the firmwareAxis support Emergency recovery procedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsVideo/Image problems general Status and Network indicator LEDs are flashing red rapidly Removing and attaching the lens Replacing the lensLens Technical SpecificationsUsers System integration Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Axis 223M Technical Specifications Glossary of Terms Axis 223M Glossary of Terms Axis 223M Index IndexRtsp