About This Document

This manual is intended for administrators and users of the AXIS 215 PTZ/ AXIS 215 PTZ-E Network Camera, and is applicable for software release 4.40. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems would also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the product. Important! - Indicates a hazard that can seriously impair operation. Do not proceed beyond any of the above notices until you have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.

This product contains licensed third-party software. See the menu item “About” in the product’s user interface for more information.

This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see http://www.opensource.apple.com/apsl/).

The source code is available from: http://developer.apple.com/darwin/projects/bonjour/

Legal Considerations

Camera surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

Electromagnetic Compatibility (EMC)

Note:

To comply with limits in Class B, use one of the following accessories when connecting I/O cables:

20291 ACC FERRITE SPLIT SNAP IN EUR

20292 ACC FERRITE SPLIT SNAP IN US

USA - This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference. Shielded cables should be used with this unit to ensure compliance with the Class B limits.

Canada - This Class B digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for radiated emission according to limit B of EN55022:1998, and the requirements for immunity according to EN55024:1998 residential, commercial, and light industry.

Japan - This is a class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

Australia - This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS 3548.

Liability

Every care has been taken in the preparation of this manual; Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Trademark Acknowledgments

Ethernet, Internet Explorer, Linux, Macintosh, Microsoft, Mozilla, Netscape Navigator, UNIX, Windows, WWW are registered trademarks of the respective holders. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. UPnP is a certification mark of the UPnPTM Implementers Corporation. Axis Communications AB is independent of Sun Microsystems Inc.

Axis Customer Services

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

•download user documentation and firmware updates

•find answers to resolved problems in the FAQ database. Search by product, category, or phrases

•report problems to Axis support staff by logging in to your private support area

•visit the Axis Support Web at www.axis.com/techsup/

Safety Notice - Battery Replacement

The AXIS 215 PTZ/ AXIS 215 PTZ-E uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC). This battery will, under normal conditions, last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear when battery replacement is required. The battery should not be replaced unless required! If the battery does need replacing, please observe the following points:

Caution! Danger of Explosion if battery is incorrectly replaced.

Replace only with the same or equivalent battery, as recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

RoHS

This product complies with both the European RoHS directive, 2002/95/EC, and the Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). This directive is applicable in the European Union member states.

The WEEE marking on this product (see right) or its documentation indicates that the product must not be disposed of together with household waste. To prevent possible harm to human health

and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste.

AXIS 215 PTZ User’s Manual	Part No: 34088
December 2008	Revision: 2.00
Copyright© Axis Communications AB, 2007-2008

215 PTZ-E specifications

Axis Communications 215 PTZ-E is a robust and versatile surveillance camera designed for enhanced monitoring capabilities across various environments. This camera exemplifies Axis's commitment to quality and innovation in the field of video surveillance. With its PTZ (pan-tilt-zoom) functionalities, it allows operators to cover expansive areas, making it an excellent choice for outdoor surveillance applications.

One of the standout features of the Axis 215 PTZ-E is its exceptional image quality. It is equipped with a high-resolution sensor that delivers clear and detailed images, even in varying light conditions. The camera supports multiple video resolutions, ensuring that users can select the resolution that best fits their requirements, whether that’s for detailed analysis or general monitoring. Additionally, the camera’s ability to function effectively in low-light environments makes it ideal for 24/7 surveillance.

In terms of its design, the Axis 215 PTZ-E is built to withstand the elements. It is housed in a weather-resistant enclosure, making it suitable for both indoor and outdoor use. The camera also features built-in heaters and fans, ensuring optimal performance regardless of the temperature variations in its surroundings.

Axis has incorporated advanced technologies in the 215 PTZ-E that enhance its operational capabilities. The camera comes equipped with powerful 18x optical zoom, allowing users to zoom in on distant objects without sacrificing image quality. This is particularly useful for monitoring large areas or for identifying specific objects or individuals from a distance. The PTZ functionality grants the camera the ability to pan 360 degrees and tilt 90 degrees, offering comprehensive coverage and the flexibility to follow moving targets.

Motion detection features are also integral to the Axis 215 PTZ-E. The camera can be programmed to trigger alerts or recordings upon detecting movement, thereby enhancing security by ensuring that all suspicious activities are monitored closely. Furthermore, users can set predefined patrol paths, allowing the camera to automatically navigate specific routes, reducing the need for constant manual operation.

With its open architecture design, the Axis 215 PTZ-E is compatible with a wide range of third-party software and systems, making it a flexible choice for diverse surveillance setups. It also supports Power over Ethernet (PoE), simplifying installation and reducing the need for additional cabling.

In summary, the Axis Communications 215 PTZ-E stands out as a powerful surveillance tool equipped with high-resolution imaging, durability for outdoor use, advanced PTZ capabilities, and integration flexibility. Its combination of features makes it an ideal solution for comprehensive security monitoring in various settings.