AXIS 215 PTZ/AXIS 215
Pre-trigger and Post-trigger buffers
This function is very useful when checking to see what happened immediately before and after a trigger, e.g. 2 minutes before and after a door has been opened. Check the Upload images checkbox under Event Types > Add Triggered... > When Triggered... to expand the web page with the available options.
Note: Buffer size - up to 9 MB buffer. The maximum length of time of the
Include
Include
Note: If the pre- or
Continue image upload (unbuffered) - enable the upload of images for a fixed length of time. Specify the length of time for the uploaded recording, in seconds, minutes or hours, or for as long as the trigger is active. Finally, set the desired image frequency to the maximum (the maximum available) or to a specified frame rate. The frame rate will be the best possible, but might not be as high as specified, especially if uploading via a slow connection.
Scheduled Event
A Scheduled event can be activated at
How to set up a scheduled event
This example describes how to set the AXIS 215 PTZ/AXIS 215
1.Click Add scheduled on the Event types page.
2.Enter a descriptive name for the event, e.g. Scheduled email.
3.Set the Priority (High, Normal or Low).
4.Set the Activation Time parameters (24h clock) when the event is to be active, e.g. start on Fridays at 18.00 with a duration of 62 hours.
5.Set the When Activated... parameters i.e. set what the AXIS 215 PTZ/AXIS 215
6.Click OK to save the Event in the Event Types list.
Please use the online help files for descriptions of each available option.
Motion Detection
In the Motion Detection menu, you can configure the AXIS 215 PTZ/AXIS 215
•Include windows target specific areas within the image
•Exclude windows are areas to be ignored within the Include window
Once configured, the motion detection windows will appear in a list when motion detection is selected to trigger an event. See How to set up a triggered event above.
Note: Using the motion detection feature may decrease overall performance in the camera.
Motion detection will not function while the lens is moving (i.e. pan, tilt, zoom)
25