AXIS 215 PTZ/AXIS 215
Accessing the camera
The AXIS 215 PTZ/AXIS 215
The AXIS 215
Note: To view streaming video in Microsoft Internet Explorer for Windows, you must set your browser to allow the AXIS Media Control (AMC) to be installed on your computer. The first time an
Accessing from a browser
1.Start a browser (Internet Explorer, Mozilla, Netscape Navigator).
2.Enter the IP address or host name of the AXIS 215 PTZ/AXIS 215
3.Enter the user name and password set by the administrator.
4.A video image is displayed in your browser.
Note:
User functions in the AXIS 215 PTZ/AXIS 215
Setting the Password
1.When accessing the camera for the first time, the
‘Configure Root Password’ dialog will be displayed on the screen.
2.Enter a password and then
3.Enter the User name: root
Note: The default administrator user name root is permanent and cannot be deleted or altered.
4.Enter the password as set in step 2 above, and click
OK. If the password is lost, the camera must be reset to the factory default settings. See page 34.
5.If required, click Yes to install the AXIS Media Control (AMC). You will need administrator rights on the computer to do this.
Accessing the camera from the Internet
Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet you must configure your router/firewall to allow incoming data traffic. For security reasons this is usually done on a specific port. Please refer to the documentation for your router/firewall for further instructions.
For more information, please visit the AXIS Internet Dynamic DNS Service at www.axiscam.net or, for Technical notes on this and other topics, visit the Axis Support Web at www.axis.com/techsup
4