Silex technology SDZ-330 instruction manual

Page 2

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Image 2
Contents SDZ-330 Page Features 30x Optical ZoomContents Precautions Tripod Mounting Bracket Screw Hole OverviewTop Front Cover RingTripod Mounting Hole Bottom BackKey Buttons To see a far object clearlyConnect cables with the unit powered down Connecting to MonitorConnecting to Power ConnectionConnecting to connection External Control Connector Function Signal LevelOr previous feature Menu Configuration Menu SetupSelect the desired feature using the UP or Down button Move the arrow indicator to the desired feature itemSet CAM Title to on using the Left or Right button Cam TitleWhen completed, move the cursor to END and press SET button White Balance ControlBacklight When completed, press the SET buttonSet Motion DET to on using the Left or Right button Motion DetectionPress the SET button · When completed, press SET buttonZoom positions using the UP or Down ZoomManual Select Manual and press the SET button ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Fast To move zoom fastEND To revert to the main setup menu Press the SET button to confirmShutter Control image brightness by adjusting shutter speed FLK Ntsc 1/100, PAL 1/120 Flicker-free modeAGC Auto Gain Control For brighter images DisabledOFF Disabled SSNRSamsung Super Noise Reduction On screen noise reductionSpecial Mask area display Configure eight mask areasAreas To move the mask area upColor CCD Camera 40 User’s Manual CAM ID NO. Assign an ID number to the camera 1 to To reset your camera to factory default conditionTo finish setup menu Troubleshooting Specifications PAL SDZ-330PFocus Far Command NameReset Focus NearOSD Menu Up OSD Menu Right OSD Menu DownOSD Menu Left OSD Menu SetDeclaration of Conformity