Troubleshooting 
Refer to the following table if you are experiencing trouble with your camera. Contact an authorized technician if the table does not provide you with a solution to the trouble.
Problem | Solution |
No display | • Check the power cable and the wiring between the |
| camera and the monitor. |
| • Ensure proper video cable connection (Video Out |
| Jack). |
|
|
Dim display | • The lens could be dirty. Clean with a soft, clean |
| piece of cloth. |
| • Adjust monitor settings. |
| • Adjust camera position if exposed to a strong light |
| source. |
|
|
Dark display | • Adjust the monitor's contrast level. |
| • Set the intermediate device, if in use, to 75Ω/ |
| (refer to p.15). |
|
|
The camera is not | • Check the power source for compliance with |
functioning properly and | specifications. |
its surface is hot |
|
|
|
Motion Detection | • Ensure that the feature is set to ON. |
feature is not active. | • Check the SENSITIVITY level. |
|
|
Uneven colors | • Adjust and configure WHITE BAL. |
|
|
Problem | Solution |
Flickering | • The camera may be facing the sun or a fluorescent |
| light. Adjust the position of the camera. |
|
|
Can't select LL mode | • The camera may be connected to a DC power |
| source. Connect to an AC power source. |
|
|
LL is not function | • Check external SYNC signal frequency (should be |
properly. | 60Hz for NTSC, 50Hz for PAL). |
|
|
COLOR CCD CAMERA 44 User’s Manual | COLOR CCD CAMERA 45 User’s Manual |