Silex technology SDZ-330 instruction manual Connection, Connecting to Monitor, Connecting to Power

Page 8

Overview

External Control Connector

Relates to the motion detection output signal.

Zoom and focus functions can be controlled using external siganals.

Power LED

Illuminates when power is supplied.

Video Output Jack

Used to connect an external video monitor in jack.

Communication Control Connector

Used to connect the Remote Controller (Optional). Includes external 'SYNC' signal input pin, which is used for the line lock function.

Includes the RS-485 communication pin.

Power Input Terminal

Power supply terminal (DC12V±10%).

Frame Ground Terminal

It is the GND terminal of the motion detection signal.

Connection

Connecting to Monitor

Connect Video Out Jack to the monitor's Video In jack as shown below.

CCD Camera

Monitor

•Connection methods may vary depending on the video equipment. Please refer to the model specific instruction manual.

•Connect cables with the unit powered down.

COLOR CCD CAMERA 14 User’s Manual

• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.

CCD Camera

Intermediate

End monitor

Connecting to Power

Connect the power cable to the camera's Power In as shown in the figure below.

Power Input Terminal

Frame Ground

Notes

•Connect the power once the installation is complete.

•The wire is polarized. Match '+' and '-' terminals properly.

•Use a DC12V/500mA power source for SDZ-330.

COLOR CCD CAMERA 15 User’s Manual

Image 8

Contents SDZ-330 Page Features 30x Optical ZoomContents Precautions Overview TopTripod Mounting Bracket Screw Hole Front Cover RingBottom Back Key ButtonsTripod Mounting Hole To see a far object clearlyConnecting to Monitor Connecting to PowerConnect cables with the unit powered down ConnectionConnecting to connection External Control Connector Function Signal LevelMenu Configuration Menu Setup Select the desired feature using the UP or Down buttonOr previous feature Move the arrow indicator to the desired feature itemSet CAM Title to on using the Left or Right button Cam TitleWhen completed, move the cursor to END and press SET button White Balance ControlWhen completed, press the SET button Set Motion DET to on using the Left or Right buttonBacklight Motion Detection· When completed, press SET button Zoom positions using the UP or DownPress the SET button ZoomONE Push Focus is automatically adjusted just once Can be manually adjusted, independent of moving zoomManual Select Manual and press the SET button Fast To move zoom fastEND To revert to the main setup menu Press the SET button to confirmShutter Control image brightness by adjusting shutter speed FLK Ntsc 1/100, PAL 1/120 Flicker-free modeDisabled OFF DisabledAGC Auto Gain Control For brighter images SSNRSamsung Super Noise Reduction On screen noise reductionSpecial Configure eight mask areas AreasMask area display To move the mask area upColor CCD Camera 40 User’s Manual CAM ID NO. Assign an ID number to the camera 1 to To reset your camera to factory default conditionTo finish setup menu Troubleshooting Specifications PAL SDZ-330PCommand Name ResetFocus Far Focus NearOSD Menu Up OSD Menu Down OSD Menu LeftOSD Menu Right OSD Menu SetDeclaration of Conformity