Silex technology SDZ-330 Bottom Back, Key Buttons, Tripod Mounting Hole, AF button

Page 7

Overview

Bottom

Back

Key Buttons

· Following buttons control zoom, focus, and auto focus functions.

Tripod Mounting Hole

Used to install the camera on an optional tripod. The tripod must be equipped with screws with specifications shown on the right.

L

1/4"-20 UNC (20 THREAD)

L:4.5mm±0.2mm (ISO standard),

or 0.197" (ASA standard)

WIDE button

: To widen the view. (ZOOM OUT)

TELE button

: To close in on a far object. (ZOOM IN)

F-NEAR button : To see a near object clearly.

F-FAR button

: To see a far object clearly.

AF button

: To activate auto focus just once.

Pressing the 'SET' button locks the zoom control function of these buttons and prompts the main setup menu.

Notes

• The zoom postion is saved after 5 seconds when you set zoom function.

Attach the bracket to the top of the camera. Use screws included in the package or their equivalent (less than 6mm). Otherwise, the bracket may not assemble to the camera properly.

COLOR CCD CAMERA 12 User’s Manual

·Main setup menu can be navigated using these buttons. SET : To access the main setup menu.

UP (WIDE button)

: To move the arrow indicator to up.

DOWN (TELE button)

: To move the arrow indicator to down.

LEFT (F-NEAR button)

: To move the arrow indicator to left.

RIGHT (F-FAR button)

: To move the arrow indicator to right.

 

COLOR CCD CAMERA 13 User’s Manual

Image 7
Contents SDZ-330 Page 30x Optical Zoom FeaturesContents Precautions Front Cover Ring OverviewTop Tripod Mounting Bracket Screw HoleTo see a far object clearly Bottom BackKey Buttons Tripod Mounting HoleConnection Connecting to MonitorConnecting to Power Connect cables with the unit powered downFunction Signal Level Connecting to connection External Control ConnectorMove the arrow indicator to the desired feature item Menu Configuration Menu SetupSelect the desired feature using the UP or Down button Or previous featureCam Title Set CAM Title to on using the Left or Right buttonWhite Balance Control When completed, move the cursor to END and press SET buttonMotion Detection When completed, press the SET buttonSet Motion DET to on using the Left or Right button BacklightZoom · When completed, press SET buttonZoom positions using the UP or Down Press the SET buttonFast To move zoom fast ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Manual Select Manual and press the SET buttonPress the SET button to confirm END To revert to the main setup menuFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Shutter Control image brightness by adjusting shutter speedSSNRSamsung Super Noise Reduction On screen noise reduction DisabledOFF Disabled AGC Auto Gain Control For brighter imagesSpecial To move the mask area up Configure eight mask areasAreas Mask area displayColor CCD Camera 40 User’s Manual To finish setup menu To reset your camera to factory default conditionCAM ID NO. Assign an ID number to the camera 1 to Troubleshooting PAL SDZ-330P SpecificationsFocus Near Command NameReset Focus FarOSD Menu Up OSD Menu Set OSD Menu DownOSD Menu Left OSD Menu RightDeclaration of Conformity