Silex technology SDZ-330 instruction manual Color CCD Camera 40 User’s Manual

Page 21

Operating Your Camera

DAY/NIGHT: Select from COLOR, BW or AUTO modes.

•COLOR : Color mode.

•B/W : BW mode.

•AUTO : The camera automatically detects lighting conditions and selects the mode accordingly.

SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes the camera’s video out signal to the external SYNC signal.

•INT : Internal synchronization

•LL : External line-lock synchronization

· If you choose ‘LL’, you can adjust the desired phase. Press the SET button.

· You can adjust the desired phase from 0 to 359.

COLOR CCD CAMERA 40 User’s Manual

Notes

•For NTSC models, the line-lock mode can be used if the external SYNC signal frequency is at 60Hz.

•For PAL models, the line-lock mode can be used if the external SYNC signal frequency is at 50Hz.

FREEZE: Use this feature to freeze capture an image. Position the indicator over 'FREEZE' using the UP or DOWN button and then set to 'ON' using the LEFT or RIGHT button. Press the SET button to confirm.

H-REV:Use this feature to horizontally inverse the screen. Position the indicator over 'H-REV' using the UP or DOWN button and then set to ON using the LEFT or RIGHT button. Press the SET button to confirm.

COLOR CCD CAMERA 41 User’s Manual

Image 21

Contents SDZ-330 Page 30x Optical Zoom FeaturesContents Precautions Top OverviewTripod Mounting Bracket Screw Hole Front Cover RingKey Buttons Bottom BackTripod Mounting Hole To see a far object clearlyConnecting to Power Connecting to MonitorConnect cables with the unit powered down ConnectionFunction Signal Level Connecting to connection External Control ConnectorSelect the desired feature using the UP or Down button Menu Configuration Menu SetupOr previous feature Move the arrow indicator to the desired feature itemCam Title Set CAM Title to on using the Left or Right buttonWhite Balance Control When completed, move the cursor to END and press SET buttonSet Motion DET to on using the Left or Right button When completed, press the SET buttonBacklight Motion DetectionZoom positions using the UP or Down · When completed, press SET buttonPress the SET button ZoomCan be manually adjusted, independent of moving zoom ONE Push Focus is automatically adjusted just onceManual Select Manual and press the SET button Fast To move zoom fastPress the SET button to confirm END To revert to the main setup menuFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Shutter Control image brightness by adjusting shutter speed OFF Disabled Disabled AGC Auto Gain Control For brighter images SSNRSamsung Super Noise Reduction On screen noise reductionSpecial Areas Configure eight mask areasMask area display To move the mask area upColor CCD Camera 40 User’s Manual To reset your camera to factory default condition To finish setup menuCAM ID NO. Assign an ID number to the camera 1 to Troubleshooting PAL SDZ-330P SpecificationsReset Command NameFocus Far Focus NearOSD Menu Up OSD Menu Left OSD Menu DownOSD Menu Right OSD Menu SetDeclaration of Conformity