Silex technology SDZ-330 Shutter Control image brightness by adjusting shutter speed

Page 17

Operating Your Camera

IRIS: Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP or DOWN button and then select the desired iris mode using the LEFT or RIGHT button.

•AUTO: The iris is automatically activated upon illumination.

•MANUAL: Manual iris configuration. Set 'IRIS' to 'MANUAL' using the LEFT or RIGHT button and then press the SET button. Increase or decrease iris level using the LEFT or RIGHT button while verifying the changes on screen.

SHUTTER : Control image brightness by adjusting shutter speed.

1.Position the indicator over 'SHUTTER' using the UP or DOWN button. Then select the desired shutter mode (A.FLK, ESC, MANUAL) using the LEFT or RIGHT button.

COLOR CCD CAMERA 32 User’s Manual

•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode

•ESC: Automatic shutter speed setting (optimal)

•MANUAL: Manual shutter speed setting

2.If you choose ‘MANUAL’, select the optimal shutter speed.

·In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).

*'Sens-Up' mode can be configured manually (2x to 128x).

·Verify changes made to the shutter speed by referencing to changes in on screen brightness.

3. Press the SET button to complete.

Notes

•Set the 'WDR' mode under the Backlight menu to OFF for maximum A.FLK performance. 'A.FLK' will not function properly otherwise.

•Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light.

•Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.

•The WDR feature is not available under MANUAL mode.

•Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.

COLOR CCD CAMERA 33 User’s Manual

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SDZ-330 Page 30x Optical Zoom FeaturesContents Precautions Top OverviewTripod Mounting Bracket Screw Hole Front Cover RingKey Buttons Bottom BackTripod Mounting Hole To see a far object clearlyConnecting to Power Connecting to MonitorConnect cables with the unit powered down ConnectionFunction Signal Level Connecting to connection External Control ConnectorSelect the desired feature using the UP or Down button Menu Configuration Menu SetupOr previous feature Move the arrow indicator to the desired feature itemCam Title Set CAM Title to on using the Left or Right buttonWhite Balance Control When completed, move the cursor to END and press SET buttonSet Motion DET to on using the Left or Right button When completed, press the SET buttonBacklight Motion Detection Zoom positions using the UP or Down · When completed, press SET button Press the SET button ZoomCan be manually adjusted, independent of moving zoom ONE Push Focus is automatically adjusted just onceManual Select Manual and press the SET button Fast To move zoom fastPress the SET button to confirm END To revert to the main setup menuFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Shutter Control image brightness by adjusting shutter speedOFF Disabled DisabledAGC Auto Gain Control For brighter images SSNRSamsung Super Noise Reduction On screen noise reductionSpecial Areas Configure eight mask areasMask area display To move the mask area upColor CCD Camera 40 User’s Manual CAM ID NO. Assign an ID number to the camera 1 to To reset your camera to factory default conditionTo finish setup menu Troubleshooting PAL SDZ-330P SpecificationsReset Command NameFocus Far Focus NearOSD Menu Up OSD Menu Left OSD Menu DownOSD Menu Right OSD Menu SetDeclaration of Conformity
Top Page Image Contents