Silex technology SDZ-330 instruction manual ONE Push Focus is automatically adjusted just once

Page 15

Operating Your Camera

•ONE PUSH : Focus is automatically adjusted just once,

after zoom position is changed. Select ' ONE PUSH' and press the SET button to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions using the directional buttons

while verifying the changes on screen. Press the SET button once desired image quality is obtained.

•MANUAL : Select 'MANUAL' and press the SET button

to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions

using the directional buttons while verifying the changes on screen. Press the SET button once desired image quality is obtained. Focus

can be manually adjusted, independent of moving zoom.

ZOOM TRK MODE: You can select to use ‘ZOOM TRK MODE’. Move the arrow indicator to ‘ZOOM TRK MODE’ using UP or DOWN button. Set ‘ZOOM TRK MODE’ to on using LEFT or RIGHT button.

ZOOM TRK SPD: Configure zoom tracing speed using this feature. Position the indicator over 'ZOOM TRK SPEED' using the UP or DOWN button and then set to desired mode using the LEFT or RIGHT button.

•FAST: To move zoom fast.

•SLOW: To move zoom slowly.

Notes

•The 'ZOOM TRK SPEED' mode cannot be used if 'MODE' is set to 'AUTO' and 'ZOOM TRK MODE' is 'ON'.

D-ZOOM:Configure magnification limit from x1, x2, x4, or x8 using this feature. Position the indicator over 'D-ZOOM' using the UP or DOWN button. Set 'D- ZOOM' to 'ON' and press the SET button to confirm.

·Set 'ZOOM LIMIT' to the desired level using the LEFT or RIGHT button.

DISP ZOOM MAG: Use this feature to display the current zoom magnification level on screen. Position the indicator over 'DISP ZOOM MAG' using the UP or DOWN button. Then set to ON using the LEFT or RIGHT button.

COLOR CCD CAMERA 28 User’s Manual

COLOR CCD CAMERA 29 User’s Manual

Page 14 Page 16
Image 15
Page 14 Page 16
Contents SDZ-330 Page 30x Optical Zoom FeaturesContents Precautions Front Cover Ring OverviewTop Tripod Mounting Bracket Screw HoleTo see a far object clearly Bottom BackKey Buttons Tripod Mounting HoleConnection Connecting to MonitorConnecting to Power Connect cables with the unit powered downFunction Signal Level Connecting to connection External Control ConnectorMove the arrow indicator to the desired feature item Menu Configuration Menu SetupSelect the desired feature using the UP or Down button Or previous featureCam Title Set CAM Title to on using the Left or Right buttonWhite Balance Control When completed, move the cursor to END and press SET buttonMotion Detection When completed, press the SET buttonSet Motion DET to on using the Left or Right button BacklightZoom · When completed, press SET buttonZoom positions using the UP or Down Press the SET buttonFast To move zoom fast ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Manual Select Manual and press the SET buttonPress the SET button to confirm END To revert to the main setup menuFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Shutter Control image brightness by adjusting shutter speedSSNRSamsung Super Noise Reduction On screen noise reduction DisabledOFF Disabled AGC Auto Gain Control For brighter imagesSpecial To move the mask area up Configure eight mask areasAreas Mask area displayColor CCD Camera 40 User’s Manual To reset your camera to factory default condition To finish setup menuCAM ID NO. Assign an ID number to the camera 1 to Troubleshooting PAL SDZ-330P SpecificationsFocus Near Command NameReset Focus FarOSD Menu Up OSD Menu Set OSD Menu DownOSD Menu Left OSD Menu RightDeclaration of Conformity
Top Page Image Contents