LOREX Technology LW2702 instruction manual Power Adapter

Connecting the LCD Receiver

3.Connect the cable from the power adapter to the 5V DC port on the bottom panel of the receiver, and then plug in the power adapter to an outlet or surge protector.

POWER

ADAPTER

Figure 3.2 Connect the 5V AC adapter.

4.Place the receiver in a location that will have a clear reception to your camera*. Rotate the tabletop stand to help position the LCD receiver to your liking.

5.OPTIONAL: Connect the included AV cable to AV OUT port on the system for viewing on a TV, VCR, or Monitor.

NOTE: When using AV Out, the LCD screen will be blacked out—the image will only appear on the TV, VCR, or Monitor.

6.Slide the power switch on the rear panel to the “ON” position.

7.Adjust the antenna on the receiver as necessary to provide the clearest reception.

Figure 3.4 Position the receiver and adjust the antenna	Figure 3.3 Power on the
	LCD receiver.

*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal structures. This will reduce the range of transmission.

15