LOREX Technology LW2702 Schedule Recording, Schedule for Automatic Motion Recording

Recording

Schedule Recording

Use Schedule Recording to have the system automatically record continuously from a selected camera or from Auto Sequence Viewing Mode according to a start and stop time. You must set a Recording Schedule in the main menu in order to use Schedule Recording.

NOTE: Please ensure you have set the date and time on the receiver prior to setting a recording schedule.

NOTE: Auto Sequence is available during Schedule Recording. However, the system will record video of the sequence itself. Therefore you cannot playback video of individual cameras.

Figure 7.1 Schedule for Automatic Motion Recording

To set a recording schedule:

1.Press the MENU button to open the Main Menu.

2.Select Record and press the Enter button.

3.Press RIGHT/LEFT to move the cursor (yellow); press UP/DOWN to change the hour and the minutes.

NOTE: You need to press RIGHT to move the cursor from Start Time to Stop Time.

4.Press the Enter button to save your schedule.

5.Press MENU until all menu windows are closed.

NOTE: You cannot enable Schedule Recording if the system is in Quad Mode.

28