LOREX Technology LW2702 instruction manual Please Press Pair Key on Camera side

Using the Main Menu

Figure 13.1 Pairing menu

To pair an additional camera:

1.Connect the camera to a power outlet. DO NOT permanently mount the camera.

2.Press MENU on the wireless receiver or remote control.

3.From the Main Menu, select Pairing and press the Enter button.

4.Select Camera 2, Camera 3, or Camera 4 and press the Enter button.

NOTE: By default, the camera included with your system is paired as Camera 1 (channel 1).

5.Following the on-screen prompt, press the Pair button on the rear panel of the camera. You have 30 seconds to press the PAIR button on the camera. Once paired, the camera will be immediately displayed on-screen.

NOTE: If you do press the Pair button on the camera during the 30 second pairing window, repeat steps 2~5 to try the pairing process again.

Once the camera is paired you can permanently mount the camera to a desired location.

Please Press

Pair Key on Camera side 30

Cam2

At the pairing screen, you have 30 seconds to press the PAIR button on the rear panel of the camera.

Figure 13.2 Pairing screen

45