LOREX Technology LW2702 Camera 1 On Camera 2 Off Camera 3 Off Camera 4 Off, Camera On/Off

Page 42

Using the Main Menu

Camera On/Off

Use the Camera On/Off menu to show/hide camera channels on the main display screen. For example, if you disable camera 3, it will not appear in single channel full-screen, or in Quad mode.

NOTE: If a power failure occurs on your system, you may need to re-configure your Camera

On/Off settings. For more details, see “Appendix G: Power Failure” on page 62.

Camera 1 On

Camera 2 Off

Camera 3 Off

Camera 4 Off

Figure 11.0 Camera On/Off menu

Make sure cameras are properly connected and paired to the receiver before disabling. To enable/disable cameras:

1.From the Main Menu, select Camera On/Off and press the Enter button.

2.Select the desired camera and press RIGHT/LEFT to select On or Off.

NOTE: The currently selected camera will have On/Off highlighted in RED.

3.Press the Enter button.

4.Press the MENU button to exit.

NOTE: Any disabled channels will be blacked out in Quad mode.

38

Image 42

Contents Digital Wireless Quad LCD Surveillance System Important Safeguards Before YOU Start Avant DE Commencer Need HELP? Necesita Ayuda Important Safeguards InstallationService UseGeneral Precautions FCC NoticeFeatures Table of Contents FAQ Card Wireless Antenna For Cameras Getting StartedLCD Monitor/Wireless Receiver Rear PanelCamera Remote Control Installing the Camera Installation WarningsConnecting the LCD Receiver Table MountingPower Adapter Under-the-Counter, Wall, or Ceiling Mounting Power on the LCD receiver LED Indicators on the LCD Receiver LED indicators on LCD receiverUsing the System On-Screen DisplayRecording Indicator The red REC icon On-Screen Display cont’dViewing Modes =Auto SequenceQuad Mode Recording TipScreen Saver Mode Screen Saver menuScreen Saver with Motion Recording Motion DetectionSetting the Time 2009/07/07 133542Recording Mode Summary RecordingWhen Should I Use Manual Recording? Manual RecordingSchedule Recording Schedule for Automatic Motion RecordingWhen Should I Use Schedule Recording? Stopping Schedule RecordingMotion Recording RECWhen Should I Use Motion Recording? Recording TipViewing Video Using the System Viewing Recorded Video3MB Playback buttons on the remote control Controlling PlaybackViewing Video Directly From the SD Card MacUsing the Intercom Two-Way Audio VolumeUsing the Main Menu Main MenuCamera 1 On Camera 2 Off Camera 3 Off Camera 4 Off Camera On/OffRecord Record menuQuality Quality menu 320x240 Qvga and640x480 VGATrigger Record Trigger Record menuSchedule Record Recording ScheduleOverwrite enable/disable OverwritePairing What is Pairing?Please Press Pair Key on Camera side Settings Settings menuDate & Time Brightness Brightness menuAV Out AV out menuScreen Saver Screen Saver menuAlarm Volume Alarm Volume menuZoom Zoom menuFormat Format menuDefault Default menuCamera Appendix a System SpecificationsGeneral LCD ReceiverAppendix B About Digital Wireless Technology Appendix C Adding Cameras Press Pair on the back of the cameraClear Line-of-Sight Appendix D Strengthening the Range of the Wireless SignalExtending Your Wireless Signal ObstaclesGHZ Directional Wireless Panel Antenna GHZ Omni-Directional Wireless Antenna0920032 5MB Appendix E Deleting Video Files on the SystemAppendix F Estimated Recording Times on SD Cards SD Card Standing Recording Time Capacity Qvga VGAAppendix G Power Failure Power Failure iconTroubleshooting Problem SolutionFAQ Revision Composez LA Ligne D’ASSISTANCE Sans Frais AUS Conommateurs Page See Hear Protect