LOREX Technology LW2702 instruction manual Recording Mode Summary

Recording

Recording

Three recording modes are available on the system: Manual Recording, Schedule Recording, and Motion Recording.

NOTE: An SD card must be inserted in the wireless receiver in order to record. You should always format the SD card prior to initial recording. For details, see “Format” on page 53.

NOTE: The system can record video to an SD card one channel at a time.

NOTE: Recording overrides other actions on the receiver. You must stop recording on the system in order to perform other actions, such as opening the Main Menu, Quad Mode, etc.

Recording Mode Summary

Mode	Description
	• Continuous recording from one camera
	• Press the Record— button on the remote control to start/stop manual
MANUAL	recording
RECORDING	• Cannot record while in Quad mode
	• Cannot record while in Auto Sequence Viewing Mode
	• Continuous recording from one camera or from Auto Sequence Viewing Mode
	(system will record from one camera at a time)
	• ATTENTION: Turn off Manual Recording and Motion Recording to enable
SCHEDULE	Schedule Recording
	• Enter a Start and Stop Time from Main Menu>Record>Schedule Record
RECORDING
	• Cannot enable Schedule Recording while in Quad Mode
	• Cannot record while in Screen Saver Mode (i.e. if the system is in Screen Saver
	Mode, Schedule Recording will be disabled)
	• System only records when motion is detected by a camera
MOTION	• Compatible with Quad Mode (recommended)
RECORDING	• Compatible with Auto Sequence Viewing Mode
(AUTO)	• Press the Motion button to start/stop Motion Recording
SCREEN	• Enable Screen Saver for LCD receiver to simulate a picture frame
	• Use with Motion Recording:
SAVER +
	• Press the Motion button to start Motion Recording
MOTION
	• Press the Scan/Del button to enable Screen Saver mode
RECORDING

For more details on each recording mode, see “Manual Recording” starting on page 27.

26