LOREX Technology LW2702 instruction manual When Should I Use Manual Recording?

Recording

Manual Recording

Manual Recording allows you to manually start/stop recording from one channel at a time. You cannot record while in Quad mode.

You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 52.

NOTE: You cannot change channels or enable Auto Sequence Viewing Mode during Manual Recording.

REC

160602-1.AVI

Cam1

2009 07 17 16:32:05

Figure 7.0 Recording indicated by the OSD

To enable Manual Recording:

1.Select a channel (1~4) on the wireless receiver or from the remote control.

2.Press the Record— button.

3.To stop Manual Recording, press the Record—

button again. “NEW” will appear on the LCD receiver indicating a new file is on the SD card.

When Should I Use Manual Recording?

•Emergency recording

•Low traffic environments

27