LOREX Technology LW2702 instruction manual Zoom menu

Using the Main Menu

Zoom

Use the zoom menu to enable 1X and 2X digital zoom on the cameras. While zoomed in, you can scan the image and view channels in full-screen.

NOTE: Zoom is intended as a temporary setting that is applied to ALL CHANNELS. When you are finished using zoom, you should return the view to 1X view.

Figure 14.6 Zoom menu

To set the zoom:

1.View camera 1, 2, 3 or 4 in single-channel full-screen.

2.From the Main Menu, select Setting and press the Enter button.

3.From the Settings menu, select Zoom and press the Enter button.

4.Select X 1 or X 2 and press the Enter button.

5.Press MENU until all menu windows are closed. The selected camera will be shown on the main display in 2X zoom.

While zoomed in you can perform the following:

•Press LEFT/RIGHT/UP/DOWN to scan the image.

•Press CHANNEL—Mto change channels manually (you can only change channels using the CHANNEL—M button while zoomed in)

•Press CHANNEL—Ato enable Auto Sequence

•Press the Record— button to start/stop manual recording

•Press QUAD to view Quad mode – all channels will be zoomed-in

To disable zoom:

1.Open the Zoom menu.

2.Select X 1 and press the Enter button.

3.Press the MENU button until all menu windows are closed.

52