LOREX Technology LW2702 instruction manual Viewing Modes, =Auto Sequence

Viewing Modes

Viewing Modes

There are four different viewing modes available on the system: single channel viewing, Auto Sequence Viewing Mode (view individual channels automatically in sequence), Quad mode, and Screen Saver Mode.

To change viewing modes:

•Press the Channel—A button to enable Auto Sequence Viewing Mode and switch automatically between channels; press Channel—M button to disable Auto Sequence.

OR

•Press the Channel—M button repeatedly to switch between channels 1~4

NOTE: By default, Auto Sequence Viewing Mode is enabled when you first power on the system, and when you exit Screen Saver mode.

Cam4

Channel 4

Cam3

Channel 3

A=Auto Sequence

PAIR

Press the Channel—M and A buttons on the receiver or remote control

Cam1

Channel 1

Cam2

Channel 2

M=Manual switching

Figure 5.0 View Mode diagram

21