Vivotek 4X-IP7142 manual

Page 35

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

4. The live video will be displayed in your player.

RTSP port /RTP port for video, audio/ RTCP port for video, audio

The RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554.

The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port for audio is set to 5559.

The five ports can be changed between 1025 and 65535. The RTP port must be an even number and the RTCP port is RTP port number plus one, and thus always be odd. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message is displayed:

Multicast settings for stream 1 / Multicast settings for stream 2: Select the Always multicast to enable multicast for stream 1 or stream 2. Unicast video transmission delivers a stream through point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group address and allows multiple clients to acquire the stream by requesting a copy from the Multicast group address.

The five ports can be changed between 1025 and 65535. The multicast RTP port must be an even number and the multicast RTCP port number is the multicast RTP port number plus one, and thus it is always be odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.

If the multicast RTP video ports are incorrectly assigned, the following warning message is displayed:

Multicast TTL [1~255]:The multicast TTL (Time to live) is the value that tells the router the range a packet can be forwarded.

NOTE

To utilize the RTSP streaming authentication, make sure that your have set a password for the Network Camera first; please refer to Security on page 24 for details.

User's Manual - 35

Image 35
Contents Page Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Hardware installationWall mount Ceiling mount Network deployment Ethernet switchInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE 0002D17142AD Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Manage User Root PasswordSecurity Add UserCreate and Install Certificate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Audio and video Video settingsImage Settings Privacy mask Page Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Style convention URL Commands of the Network CameraOverview Method GET/POST General CGI URL syntax and parametersSecurity level Get server parameter valuesSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group doi0~ndo-1 Group dii0~ndi-1Subgroup of network http Group securitySubgroup of network pppoe Subgroup of network httpsSubgroup of network rtsp Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentation= Logalert = Logcrit Group uarti0~n-1 n is uart port count EvenGroup capability Group eventi0~2 Group serveri0~4 Group recordingi0~1 Group mediai0~4To enable or disable this recoding Query status of the digital input Drive the digital outputCapture single snapshot Query status of the digital outputAccount management Method Post Upgrade firmwareSystem logs System InformationMethod GET/POST IP filteringSenddata Get SDP of StreamingsOpen the network streamings Page Lens Technical SpecificationsTechnology License Notice Electromagnetic Compatibility EMC