Vivotek 4X-IP7142 manual Event Settings

Page 55

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Event Settings

In the Event column, click Add to open the event setting page. In this page, you can arrange the three elements -- Trigger, Schedule and Action to plot an event. A total of three event settings can be conﬁgured.

Event name: Enter a descriptive name for the event setting.

Enable this event: Select this option to enable this event setting.

Priority: Select the relative importance of this event (High, Normal, and Low). Events with higher priority setting will be executed ﬁrst.

Detect next event after seconds: Enter the duration in seconds to pause motion detection after a motion is detected.

An event is an action initiated by user-deﬁned trigger source; it is the causal arrangement of the following three elements: Trigger, Event Schedule, and Action.

Trigger: Also referred as the cause or stimulus, deﬁnes when to trigger the Network Camera. The trigger source can be conﬁgured to use the Network Camera’s built-in motion detection mechanism or external digital input devices.There are four choices of trigger sources:

■ Video motion detection

Select this option to allow the Network Camera to use the built-in motion detection mechanism as a trigger source. To enable this function, you need to configure Motion detection first. For more information, please refer to Motion detection on page 45 for details.

■ Periodically

Select this option to allow the Network Camera to trigger periodically for every other deﬁned minute. At most 999 minutes can be set.

■ Digital input

Select one of the Digital inputs to allow the Network Camera to use external digital input device as a trigger source. Depending on your applications, there are choices of digital input devices on the market

User's Manual - 55

Image 55

Contents Page Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Hardware installationWall mount Ceiling mount Network deployment Ethernet switchInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE 0002D17142AD Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Manage User Root PasswordSecurity Add UserCreate and Install Certiﬁcate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings Privacy mask Page Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Conﬁguration File Upgrade Firmware Page Overview URL Commands of the Network CameraStyle convention Method GET/POST General CGI URL syntax and parametersSecurity level Get server parameter valuesSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group doi0~ndo-1 Group dii0~ndi-1Subgroup of network http Group securitySubgroup of network rtsp Subgroup of network httpsSubgroup of network pppoe Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentation= Logalert = Logcrit Group uarti0~n-1 n is uart port count EvenGroup capability Group eventi0~2 Group serveri0~4 Group recordingi0~1 Group mediai0~4To enable or disable this recoding Query status of the digital input Drive the digital outputCapture single snapshot Query status of the digital outputAccount management Method Post Upgrade ﬁrmwareSystem logs System InformationMethod GET/POST IP ﬁlteringOpen the network streamings Get SDP of StreamingsSenddata Page Lens Technical SpeciﬁcationsTechnology License Notice Electromagnetic Compatibility EMC